Kenmore 25351692103 side-by-side refrigerator Parts

Your Kenmore side-by-side refrigerator model 25351692103 has 25.6 cubic feet of total capacity. That breaks down into 15.5 cu. ft. for the fresh food (refrigerator) section and 10.1 cu. ft. for the freezer.

Capacity breakdown (what the numbers mean)

Total capacity is the combined storage volume of both compartments. For model 25351692103, use these figures when comparing refrigerators or planning kitchen space:

• Total capacity: 25.6 cu. ft.
• Refrigerator (fresh food) capacity: 15.5 cu. ft.
• Freezer capacity: 10.1 cu. ft.
• Side-by-side layout typically splits capacity close to this ratio

Compartment	Capacity (cu. ft.)
Fresh food (refrigerator)	15.5
Freezer	10.1
Total	25.6

Why it matters

Knowing the exact cubic feet helps you compare like-for-like replacements, estimate weekly food storage, and choose organization parts (bins, shelves, crispers) that fit your layout without sacrificing usable space.

Related maintenance that protects usable space

If storage feels tight, it is often because frost, poor airflow, or a leaking door seal is stealing space. These steps help restore normal usable room:

• Replace the water filter on schedule to keep water and ice flowing normally; see genuine Kenmore refrigerator water filter WF2CB
• Check door gaskets for gaps, tears, or hardening; a worn gasket can cause frost buildup
• Keep vents clear behind bins and shelves so cold air circulates properly
• If you need parts by diagram for this model, order from the parts list for 25351692103 or search by model on Sears PartsDirect

Last updated: February 2026

The Kenmore side-by-side refrigerator model 25351692103 is 35 5/8 inches wide (overall exterior width). For installation, we also recommend confirming your cabinet opening and allowing clearance for door swing and airflow so the refrigerator fits and operates correctly.

What to measure before you buy or reinstall

Even with a known overall width, these checks prevent tight fits and door clearance problems:

• Measure the cabinet opening width at the front and back
• Confirm overall width at the widest point (often handles or door edges)
• Check door swing clearance so doors open fully without hitting walls or cabinets
• Leave ventilation space above and behind for proper cooling
• Verify the water line path (if you have an ice maker or dispenser)

Quick fit guide for 25351692103

Use this as a planning snapshot; your opening and trim can change what works.

Item to check	Target for 25351692103	Why it matters
Refrigerator overall width	35 5/8 in.	Determines if it fits between cabinets
Side clearance	1/8 to 1/4 in. per side	Helps prevent rubbing and improves airflow
Door swing space	Enough to fully open both doors	Needed for crisper access and bin removal

Why it matters

A refrigerator that is even slightly too wide can bind against cabinets, prevent doors from sealing, and reduce cooling efficiency. If the doors are rubbing or not sealing after moving the unit, inspect the door gaskets; a worn gasket can also make the doors feel “tight” in the opening.

Helpful related parts and DIY help

• If you suspect a sealing issue, see the refrigerator gasket 241786014
• For water and ice performance after installation, follow how to replace the water filter in a Kenmore refrigerator
• You can order parts from the list for model 25351692103, or search by model on Sears PartsDirect

Last updated: February 2026

On a Kenmore side-by-side refrigerator like model 25351692103, the model number is printed on the appliance identification label. We most often see that label inside the fresh food (refrigerator) compartment along the side wall, ceiling area, or near the crisper drawers; it can also be on the freezer side wall.

Common places to check first

• Inside the refrigerator compartment on the left or right side wall (eye level)
• On the ceiling of the refrigerator compartment near the light housing
• On the frame just behind the refrigerator door (door jamb area)
• Near the crisper drawer area (side wall or frame)
• Inside the freezer compartment on a side wall

What the label looks like and what to write down

The label typically lists both a model number and a serial number.

Item	What it’s used for	Example format
Model number	Matching the correct parts diagrams and replacement parts	25351692103
Serial number	Identifying production details for service and compatibility checks	Letters and numbers

Why it matters

Using the exact model number (including every digit) is the fastest way to get the right Kenmore refrigerator parts, such as a water filter, door gasket, or light bulb, without ordering the wrong fit.

Parts you can match once you find the model number

After you confirm the label shows 25351692103, you can shop the parts list for common replacements, for example:

• Genuine Kenmore refrigerator water filter WF2CB (water taste, odor, and flow issues)
• Refrigerator light bulb 316538904 (interior light out or flickering)
• Refrigerator gasket 241786014 (warm spots, moisture, or poor door seal)

For broader model lookups and parts searches, use Sears PartsDirect.

Last updated: February 2026