Snapper
Gas Snowblower

Model #EI7244 Snapper snow thrower - series 4

Here are the diagrams and repair parts for Snapper EI7244 snow thrower - series 4, as well as links to manuals and error code tables, if available.


There are a couple of ways to find the part or diagram you need:

  • Click a diagram to see the parts shown on that diagram.
  • In the search box below, enter all or part of the part number or the part’s name.

Not all parts are shown on the diagrams—those parts are labeled NI, for “not illustrated”.

We encourage you to save the model to your profile, so it’s easy to access parts and manuals for your appliance whenever you log in.

For DIY troubleshooting advice and repair guides, visit our repair help section.

Save to my profile

Showing 10 of 257 parts

|

Fitting

#20

Augers/impeller/gear case/shaft Diagram

Fitting

Part #7013864SM
?
Manufacturer substitution
This part replaces 1-3864. Substitute parts can look different from the original.
This part replaces 1-3864
This item is not returnable
$2.23 | 
36% OFF MSRP:$3.50

In Stock

FITTING, GREASE (2)

#25

Collector housing (3 piece bolted) Diagram

Fitting, grease (2)

Part #1-0817

The manufacturer no longer makes this part, and there's no substitute part

WASHER (3)

#12

Frame, traction drive Diagram

Washer (3)

Part #1-0935

The manufacturer no longer makes this part, and there's no substitute part

Chute Crank Knob

#15

Handles, controls (single handle) Diagram

Chute crank knob

Part #1-3901

The manufacturer no longer makes this part, and there's no substitute part

BEARING, AUGER (2)

#8

Collector housing (3 piece bolted) Diagram

Bearing, auger (2)

Part #1-4608

The manufacturer no longer makes this part, and there's no substitute part

Spring

#45

Frame, traction drive Diagram

Spring

Part #1-5178

The manufacturer no longer makes this part, and there's no substitute part

FINGER, BELT

#25

Engine/pulleys/idler/clutch system Diagram

Finger, belt

Part #1-5226

The manufacturer no longer makes this part, and there's no substitute part

PIN, 1/4 X 1-7/8" CLEVIS

#5

Handles, controls (single handle) Diagram

Pin, 1/4 x 1-7/8" clevis

Part #1-6297

The manufacturer no longer makes this part, and there's no substitute part

Spacer

#10

Collector housing (3 piece bolted) Diagram

Spacer

Part #1-7865

The manufacturer no longer makes this part, and there's no substitute part

Lock Cam

#29

Handles, controls (single handle) Diagram

Lock cam

Part #1-8980

The manufacturer no longer makes this part, and there's no substitute part

Showing 10 of 257 parts

Symptoms for gas snowblowers

Choose a symptom to see related snowblower repairs.

Main causes: punctured tire, damaged rim
Main causes: dirty carburetor, clogged fuel filter, dirty spark plug, incorrect valve lash, leaky engine gaskets
Things to do: replace the spark plug, change the oil, rebuild the carburetor, adjust valve lash, adjust or replace the belts
Main causes: loose drive clutch cable, damaged drive clutch cable, worn friction disc, scraper blade scraping the ground, engine problems
Main causes: clogged chute, damaged auger blades, broken shear pins, worn auger belt, damaged gear case, engine problems
Main causes: clogged chute, snow build-up in auger housing, broken auger shear pins, auger drive belt needs adjustment, auger cable problems
Main causes: stale gas, clogged carburetor, clogged or broken fuel line, dirty spark plug, bad rewind starter, incorrect valve lash
Main causes: dirty carburetor, stale fuel
Main causes: snow build-up in chute, chute drive mechanism failure, bad chute control assembly

Repair guides for gas snowblowers

These step-by-step repair guides will help you safely fix what’s broken on your snowblower.

December 1, 2015
By Lyle Weischwill
How to replace a snowblower spark plug

You need a spark to fire up the engine of your snowblower, and that spark comes from a spark plug. You can replace one in minutes.

Repair difficulty
Time required
 15 minutes or less
December 1, 2015
By Lyle Weischwill
How to replace a snowblower fuel line

Replace the fuel line on your snowblower if it's cracked or damaged.

Repair difficulty
Time required
 30 minutes or less
January 20, 2015
By Lyle Weischwill
How to replace a snowblower shear pin

The shear pin breaks if you hit hard-packed snow, to protect the engine from damage. Your snowblower auger won't rotate until you fix it. You can replace it in about 10 minutes.

Repair difficulty
Time required
 15 minutes or less

Articles and videos for gas snowblowers

Use the advice and tips in these articles and videos to get the most out of your snowblower.

November 1, 2014

How to adjust a snowblower auger control video

By Sears PartsDirect staff

This video shows how to adjust a snowblower's auger control.

November 1, 2014

How to adjust a snowblower drive control video

By Sears PartsDirect staff

Learn how to tighten a snowblower drive control if the drive slips or doesn't engage, and how to loosen it if the snowblower creeps when you disengage the drive.

November 1, 2014

How to adjust a snowblower chute control rod video

By Sears PartsDirect staff

See how to replace the chute control rod on a snowblower.