Craftsman 917385120 lawn mower Parts

Gas walk-behind mowers like the Craftsman 917385120 are not being phased out everywhere at once; the shift is happening gradually as some states and cities restrict new sales of certain gas-powered outdoor equipment, while many areas still allow gas mowers to be sold, serviced, and used.

Even where new gas mower sales are limited, owners typically can keep using and maintaining existing equipment. For this model, routine maintenance and using OEM replacement parts helps keep it reliable for years.

• Keep up with blade care and replace bent or damaged blades.
• Use only manufacturer-approved replacement parts to avoid fit and safety issues.
• Follow safe service steps (disconnect the spark plug wire before blade work).
• Store fuel correctly and avoid carrying old gas from season to season.
• Winterize properly before long storage.

If your mower is cutting poorly or vibrating, blade-related wear is one of the first places we look.

• Replace the blade if it is bent, cracked, or won’t hold an edge: lawn mower blade 532406713
• If the blade feels loose or the mower won’t start, inspect the adapter: lawn mower blade adapter 581547901
• Use the correct hardware and tighten securely after service

For step-by-step safety and maintenance guidance specific to this mower, use the 917385120 owner’s manual.

Regulations and buying trends affect what is sold new, but your day-to-day ownership is mostly about safe operation, correct parts fit, and seasonal maintenance. Keeping the blade system and fuel storage practices in good shape prevents many common starting and cutting problems.

Last updated: January 2026

On the Craftsman walk-behind mower model 917385120, the model number is printed on the mower’s identification label; it’s typically on the rear of the mower deck near the lower handle mounting area. Use the model number to match the correct parts list and diagrams in the 917385120 owner's manual.

Check these common label locations first:

• Back of the mower deck (rear-facing side)
• Between or near the lower handle mounts
• Near the discharge chute area on the deck (less common)
• On the deck top surface near the engine (occasionally)

Record the key identifiers exactly as shown on the label.

Craftsman walk-behind mowers can look similar across multiple model numbers, but parts like the blade, blade adapter, and handle hardware can differ. Using the correct model number helps you avoid ordering the wrong replacement part.

• Wipe the label gently with a damp cloth
• Use a flashlight at an angle to make faint printing stand out
• Take a close-up photo and zoom in

Last updated: January 2026

The model number is 917.385120; it’s printed on the Craftsman rotary lawn mower’s identification label and shown on the cover of the 917385120 owner's manual. This model is a 22-inch side-discharge walk-behind mower with a Briggs & Stratton 550 Series engine.

We recommend checking these common spots first:

• On the mower deck near the rear discharge area
• Near the handle mounting points on the deck
• On a label or plate close to the engine base
• In the paperwork that came with the mower

For Sears PartsDirect parts matching, use the full model number exactly as shown (including the dot).

Using the exact model number ensures you get the right diagrams and compatible parts (like the blade, blade adapter, and handle hardware) for your Craftsman walk-behind mower.

Last updated: January 2026