Get free shipping on your order, with any water filter subscription. Find my filter

Open Hamburger Menu
Sears Parts Direct
Tips to find your model number
Whirlpool WFW8620HW4 washer

Whirlpool WFW8620HW4 washer Parts

Here are the diagrams and repair parts for Whirlpool WFW8620HW4 washer, as well as links to manuals and error code tables, if available.

By Schematic
By Part
SELECT DIAGRAM
?

This is the number corresponding to the part on the diagram / schematic

Browse Parts for WFW8620HW4 WASHER

  • Washer Outer Tub And Basket Assembly for Whirlpool WFW8620HW4 - Part W11378552

    Assembly, Tub And Drum

    Part #W11352126

    Replaced by #W11378552

    Info Icon
    Manufacturer substitution
    This part replaces W11352126. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $821.81
    $12.00 OFF Phone Price : $833.81Info Icon
    Minus Item
    Qty
    Plus Item
  • Dispenser for Whirlpool WFW8620HW4 - Part W11321010

    Backer Singl

    Part #W11114814

    Replaced by #W11321010

    Info Icon
    Manufacturer substitution
    This part replaces W11114814. Substitute parts can look different from the original.
    In Stock
    $149.09
    7% OFF Phone Price : $161.09Info Icon
    Minus Item
    Qty
    Plus Item
  • Washer Drain Hose U-bend Bracket for Whirlpool WFW8620HW4 - Part WPW10280024

    Washer Drain Hose U-bend Bracket

    Part #W10280024

    Replaced by #WPW10280024

    Info Icon
    Manufacturer substitution
    This part replaces W10280024. Substitute parts can look different from the original.
    In Stock
    $75.64
    Minus Item
    Qty
    Plus Item
  • Screw for Whirlpool WFW8620HW4 - Part W11661566

    Screw

    Part #W10288126

    Replaced by #W11661566

    Info Icon
    Manufacturer substitution
    This part replaces W10288126. Substitute parts can look different from the original.
    In Stock
    $42.98
    Minus Item
    Qty
    Plus Item
  • Washer Shipping Bolt for Whirlpool WFW8620HW4 - Part W11316629

    Bolt Asm - T

    Part #W11041011

    Replaced by #W11316629

    Info Icon
    Manufacturer substitution
    This part replaces W11041011. Substitute parts can look different from the original.
    In Stock
    $28.30
    17% OFF Phone Price : $34.30Info Icon
    Minus Item
    Qty
    Plus Item
  • Clamp for Whirlpool WFW8620HW4 - Part WP371502

    Hose Clamp

    Part #371507

    Replaced by #WP371502

    Info Icon
    Manufacturer substitution
    This part replaces 371507. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $9.90
    9% OFF Phone Price : $10.90Info Icon
    Minus Item
    Qty
    Plus Item
  • Washer Fill Hose, 2-pack for Whirlpool WFW8620HW4 - Part 8212638RP

    Washer Fill Hose, 2-pack

    In Stock
    $43.26
    12% OFF Phone Price : $49.26Info Icon
    Minus Item
    Qty
    Plus Item
  • Bumper-lid for Whirlpool WFW8620HW4 - Part W11230200

    Bumper-lid

    In Stock
    $20.67
    22% OFF Phone Price : $26.67Info Icon
    Minus Item
    Qty
    Plus Item
  • Bracket-rear for Whirlpool WFW8620HW4 - Part W11353016

    Bracket-rear

    In Stock
    $25.36
    19% OFF Phone Price : $31.36Info Icon
    Minus Item
    Qty
    Plus Item
  • Plinth - Fas for Whirlpool WFW8620HW4 - Part W11174518

    Plinth - Fas

    In Stock
    $201.84
    Minus Item
    Qty
    Plus Item

Whirlpool WASHER WFW8620HW4 FAQs

A Whirlpool washing machine typically lasts 10 to 14 years. For your Whirlpool WFW8620HW4 front-load washer, consistent care (proper detergent, not overloading, and keeping the drain system clear) is what most directly determines whether you land closer to 10 years or closer to 14.

Typical lifespan and what affects it

Most washer failures that shorten lifespan come from wear, moisture, and strain on moving parts.

  • Overloading or frequent heavy loads increases stress on the tub, drum, and motor system
  • Using too much detergent can cause residue buildup and odors
  • Poor drainage (coins, lint, small items) strains the pump and can leave water sitting in the machine
  • Hard water can accelerate scale and valve issues
  • Skipping routine cleaning encourages mold and corrosion in front-loaders

Parts that commonly drive “end of life” decisions

When a washer is near the end of its service life, repairs often involve higher-cost assemblies. These examples are available for model WFW8620HW4:

Symptom Common system involved Example part on this model
Won’t drain, leaves water in tub Drain system Washer drain pump assembly W11458345
Door won’t lock or cycle won’t start Door lock and strike Ha15g janus- W11565030, strike, door W11316914
Loud rumble, leaks, severe vibration Tub and drum system Assembly, tub and drum W11378552

Maintenance that extends life (front-load specific)

These habits keep a Whirlpool front-load washer running longer and reduce odor and leak risk.

  • Leave the door slightly open between loads to dry the gasket area
  • Run a monthly cleaning cycle (or hot cycle) to reduce residue
  • Use HE detergent and measure carefully
  • Check pockets to prevent drain clogs
  • Inspect fill hoses yearly; replace if bulging, cracking, or leaking (for example, washer fill hose set 8212545RP)

Why it matters

A washer that drains fully, locks the door reliably, and stays clean inside puts less strain on the motor, pump, and tub bearings. That directly improves reliability and helps you reach the full expected lifespan.

For replacement parts for Whirlpool WFW8620HW4, we list model-matched options on this page; you can also search by model number on Sears PartsDirect.

Last updated: February 2026

The most common Whirlpool washer problems are draining issues, leaks, and spin problems. On a Whirlpool WFW8620HW4 front-load washer, these symptoms most often trace back to the drain path (pump, drain hose, clogs), the door lock and strike, or fill hoses and connections.

Most common issues we see (and what they look like)

  • Won’t drain or stops mid-cycle: water left in the tub, “drain” sounds but no water flow
  • Leaks: water under the front, at the wall connections, or during fill
  • Won’t spin or clothes are too wet: load stays heavy, cycle ends with water still present
  • Door won’t lock or won’t start: door clicks but cycle will not begin
  • Error codes: often point you toward drain, door lock, or water supply problems

Quick checks you can do first (no parts needed)

  • Unplug the washer for 1 minute, then restore power and retry the cycle.
  • Confirm the load is not overpacked; front-load washers spin best with room to tumble.
  • Check the standpipe or laundry sink for slow draining (a house drain issue can mimic a washer failure).
  • Inspect the drain hose for kinks or crushing behind the washer.
  • Verify both hot and cold water valves are fully open and hoses are not twisted.

Parts that commonly solve these symptoms on WFW8620HW4

If the basic checks do not fix it, these model-matched parts are common next steps:

Symptom Likely area Example part for this model
Won’t drain / Fills then stops Drain pump or drain hose restriction Washer drain pump assembly W11458345 or hose assy-dr W11549455
Door won’t lock / won’t start Door lock or door strike alignment Ha15g janus- W11565030 or strike, door W11316914
Leaks at the wall hookup Fill hose or washer connection Washer fill hose set 8212545RP

Why it matters

Drain, leak, and spin complaints are often connected. If the washer cannot drain fast enough, it may refuse to spin at full speed to protect the motor and control, leaving clothes wet and triggering error codes.

Helpful DIY reference

For code-based troubleshooting, use our Whirlpool duet steam front load washer error codes guide to match the display code to the most likely checks and repairs.

You can order replacement parts for your Whirlpool WFW8620HW4 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

“Quiet Partner III” is a Whirlpool dishwasher series name, not a single model number, and it is not related to Whirlpool washer model WFW8620HW4. To get the exact Quiet Partner III dishwasher model, read the model tag on the dishwasher, then use that full model number to look up the correct parts on Sears PartsDirect.

Where to find the model number on a Quiet Partner III dishwasher

Look in these common spots:

  • Tub frame around the door opening (left or right side)
  • Inner edge of the door
  • Side wall just inside the tub opening
  • Behind the lower kickplate (after removing the mounting screws)

What the model number looks like

Whirlpool dishwasher model numbers are usually a letter and number mix (often starting with GU, WDF, WDT, or similar). Write down the full model number exactly as shown, including any suffix numbers.

Examples of Quiet Partner III model numbers

These are commonly seen with Quiet Partner III branding:

  • GU2200XTSS3
  • GU2300XTVQ
  • GU2300XTVS
  • GU2500XTP83

Quick guide: series name vs. model number

What you see What it is What to use for parts
“Quiet Partner III” on the console Series/marketing name Not enough by itself
A code like “GU2300XTVS” Exact dishwasher model Use this to match parts
Serial number only Production identifier Keep looking for the model tag

Why it matters

Parts such as the door latch, circulation pump, drain pump, and control board can vary by the exact dishwasher model, even when the Quiet Partner III branding looks the same. Using the full model number prevents ordering the wrong part.

Last updated: February 2026

Most common symptoms to help you fix your washers

Choose a symptom to see related washer repairs.

Main causes: clogged drain hose, house drain clogged, bad drain pump, water-level pressure switch failure, bad control b…

Main causes: broken lid switch or lid lock, bad pressure switch, broken shifter assembly, faulty control system…

Main causes: worn agitator dogs, bad clutch, broken motor coupler, shifter assembly failure, broken door lock, suspensio…

Main causes: water heater failure, bad water temperature switch, faulty control board, bad water valve, faulty water tem…

Main causes: lack of electrical power, wiring failure, bad power cord, electronic control board failure, bad user interf…

Main causes: no water supply, bad water valves, water-level pressure switch failure, control system failure, bad door lo…

Main causes: unbalanced load, loose spanner nut, worn drive block, broken shock absorber or suspension spring, debris in…

Main causes: leaky water inlet valve, faulty water-level pressure switch, bad electronic control board…

Main causes: bad lid switch or door lock, bad timer or electronic control board, wiring failure, bad water inlet valve a…

Repair guides for treadmills

These step-by-step repair guides will help you safely fix what’s broken on your treadmill.

How to replace a treadmill walking belt

How to replace a treadmill walking belt

A worn walking belt will begin to slow down during use. If your treadmill walking belt is worn out, replace it using the…

Repair time and Difficulty

 45 minutes or less
How to replace a treadmill walking board

How to replace a treadmill walking board

A worn-out walking board creates friction with the walking belt and causes the belt to slow down during use. Replace the…

Repair time and Difficulty

 30 minutes or less
How to replace a treadmill drive motor

How to replace a treadmill drive motor

A defective drive motor won't run when activated by the motor controller. Replace the treadmill drive motor if it doesn'…

Repair time and Difficulty

 15 minutes or less

Effective articles & videos to help repair your washers

Use the advice and tips in these articles and videos to get the most out of your washer.

How auto-load sensing washers work (and when they don't)

How auto-load sensing washers work (and when they don't)

Your washer barely fills or seems stuck in sensing mode? Find out how auto-load sensing and Precise Fill features work, …

How to remove the main control board and user interface from a Maytag Epic Z front-load washer

How to remove the main control board and user interface from a Maytag Epic Z front-load washer

Get step-by-step instructions for removing the main electronic control board and the control panel from a Maytage Epic Z…

Using a wiring schematic to trace a current video

Using a wiring schematic to trace a current video

Find out what’s wrong with your appliance by following a circuit.…