Craftsman 486243291 tow-behind power mower Parts

On the Craftsman tow-behind power mower model 486243291, the model and serial numbers are printed on an ID plate attached to the right side of the drive housing. We recommend writing both numbers down and keeping them with your paperwork for parts lookup and service reference; see the 486243291 owner's manual.

Where to look on model 486243291

Check these spots in order:

• Right side of the drive housing (ID plate with model and serial)
• Near the hitch area and frame rails (labels can be easier to see with the mower unhooked)
• Under heavy grass buildup or dirt (wipe the plate clean so the numbers are readable)

What to record (and why)

Record both numbers exactly as shown:

• Model number: identifies the correct diagrams and parts list
• Serial number: helps match production variations and correct hardware
• Date of purchase: useful for maintenance history and future reference

Quick reference table

Item to find	What it looks like	What we use it for
Model number	“MODEL NO.” followed by digits	Selecting the correct Craftsman parts breakdown
Serial number	“SERIAL NO.” followed by digits/letters	Confirming the right version of the attachment
ID plate location	Metal or durable label	Fast, accurate parts identification

Tips if the label is hard to read

• Clean the plate with a damp rag and mild soap; avoid harsh solvents that can remove printing.
• Use a flashlight at an angle to make stamped or faded characters stand out.
• Take a clear photo and zoom in to confirm each digit.

Why it matters

Using the correct model number prevents ordering the wrong mower attachment parts (like a pulley, belt hardware, or fasteners) and helps ensure the diagrams match your exact Craftsman setup.

Last updated: January 2026

Most stand-on mowers weigh about 500 to 1,000 lb, depending on deck size and whether it is a commercial-duty unit. The Craftsman 486243291 in our documentation is a tow-behind mower attachment, so its manual focuses on setup and operating specs, not stand-on mower weight.

Typical stand-on mower weight ranges

Use these ranges to plan trailering, ramps, and tie-downs.

• Smaller stand-on (around 36 to 48 inch decks): 500 to 750 lb
• Mid-size commercial stand-on (around 48 to 60 inch decks): 700 to 950 lb
• Large commercial stand-on (around 60 inch decks): 850 to 1,000 lb
• Add-ons increase weight: bagger, striping kit, larger fuel tank, heavier tires

What changes the weight the most

• Deck width and deck construction (stamped vs. fabricated)
• Engine size and frame thickness
• Hydro drive components and wheel motors
• Fuel load and accessories

How to get the exact weight for your mower

If you have a specific stand-on mower model, the most accurate weight is the manufacturer listed operating weight.

• Check the mower’s spec label and owner documentation
• Look for “operating weight” or “dry weight”
• If you are comparing to a tow-behind setup, include the tow vehicle plus attachment

Quick comparison table

Equipment type	Typical weight	Notes
Stand-on mower	500 to 1,000 lb	Commercial models trend heavier
Zero-turn rider	550 to 1,200+ lb	Wide range by frame and deck
Tow-behind mower attachment	Varies by attachment	Weight depends on deck and engine

Why it matters

Weight affects trailer capacity, ramp rating, safe loading, and how much the machine can mark soft turf. It also impacts stability on slopes and how securely you need to strap it down.

For operating and setup details for the Craftsman tow-behind attachment model 486243291, use the 486243291 manual.

Last updated: January 2026

On the Craftsman 486243291 tow-behind power mower attachment, the manual focuses on cutting height and hitch offset, not a “stand-on” mower platform width. For this model, the most useful “width” specs are the hitch offset positions (15, 29, or 39 inches) and your tractor’s cutting path.

What “width” usually means (and what applies to model 486243291)

For stand-on mowers, “width” often means the deck cutting width or the operator platform width. For the Craftsman 486243291 tow-behind attachment, these are the width-related items that matter most:

• Hitch offset width: the mower can run offset from the tow vehicle to increase effective cutting coverage.
• Cutting path planning: offset helps prevent the tow vehicle from flattening grass before the blades reach it.
• Deck leveling (rake): front-to-back deck angle affects cut quality more than a “stand” width.

For model-specific setup details, use the Craftsman 486243291 owner’s manual.

Model-specific width spec: tow hitch offset positions

The Craftsman 486243291 adjustable tow hitch can be set straight or offset to either side in three positions.

Setting type	Offset options	What it helps with
Straight	0 in.	Basic towing alignment
Offset	15 in., 29 in., 39 in.	Wider effective coverage; reduces grass being crushed by the tow vehicle

Quick selection guide

• 39-inch offset: best when your tow vehicle already has a mid-mount mower around 42 to 50 inches.
• 29-inch offset: best when your tow vehicle mower is around 36 to 40 inches.
• 15-inch offset: use for heavier grass or tougher conditions.

Why it matters

Choosing the right offset width helps you cut more evenly and reduces missed strips caused by tire tracks flattening grass before the tow-behind deck reaches it.

Last updated: January 2026