Gladiator Refrigerator Parts — Browse All Models

Need help diagnosing or repairing a problem? Visit our DIY refrigerator repair help page for step-by-step instructions and refrigerator error code charts to guide you through the fix.

Common Gladiator refrigerator problems we help you fix

Along with replacement parts for your Gladiator refrigerator, we provide the repair guidance to solve the most frequent refrigerator issues. Whether it’s leaking water, temperature fluctuations or constant cycling, we can help.

Refrigerator isn’t staying cold

If food is spoiling or the fridge feels warm inside, temperature sensors or the thermostat may not be regulating the system correctly. You can use our guide on how to replace a refrigerator temperature control thermostat to restore proper cooling.

If the temperature varies between compartments or the fridge runs non-stop, the issue might be with the thermistor. Follow this step-by-step guide on how to replace a refrigerator thermistor to fix the problem.

Cold air is escaping around the door

If you see moisture, frost, or feel warm air around the door seal, the gasket may be cracked or loose. That allows cold air to leak out, making your refrigerator work harder. You can replace the door gasket in just a few steps using our DIY repair guide.

If your seal is in place but not gripping properly, try these tips on how to fix a fridge door seal.

Fridge keeps running or never shuts off

Refrigerators that never seem to stop running may have dirty condenser coils or faulty sensors that aren’t signaling when to cycle off. If your fridge is constantly on, learn how to replace the temperature control thermostat or use our refrigerator error code chart to pinpoint the issue.

Replacement parts to keep your Gladiator refrigerator running efficiently

We stock the most common repair and maintenance parts for Gladiator models so you can get your fridge working again without waiting.

Parts we carry include:

• Door gaskets and seals to keep cold air in and warm air out
• Thermistors and thermostats for precise temperature control
• Electronic control boards to restore display and power functions
• Air filters and water filters to maintain freshness and water flow
• Light switches, bulbs, and sensor kits

Need help choosing the right part? Our DIY refrigerator repair help section can guide you by symptom or part category.

FAQs

Q: Why is my refrigerator making popping or cracking sounds?

A: That’s typically normal. It happens as plastic expands and contracts during cooling cycles—but loud, frequent noises could mean ice buildup or a faulty fan.

Q: Why is there ice on the back wall of my fridge?

A: This usually indicates a defrost system failure. Check the defrost thermostat, timer, or heater for damage and replace as needed.

Q: Why is water pooling under my refrigerator crisper drawers?

A: This often points to a clogged defrost drain. When the defrost cycle runs, melted ice has nowhere to go and collects inside the compartment.

Q: Can I replace my refrigerator’s temperature control board myself?

A: Yes. If your fridge is running warm or doesn’t respond to settings, replacing the temperature control board is often a straightforward repair.

Q: Why is my refrigerator not cooling properly?

A: A common cause is dirty condenser coils or a faulty thermostat. Check airflow, inspect the evaporator fan, and clean the coils to improve performance.