Fisher & Paykel Dishwasher Parts — Browse All Models

Common Fisher & Paykel dishwasher repairs

Dishwasher won’t fill

If your dishwasher isn’t filling with water, start with the basics—make sure the door is fully latched, as the cycle won’t begin otherwise. Clear any debris from the overfill float, also called the mushroom float, which can prevent filling if it’s stuck in the “up” position. Confirm the water supply valve is open, and check the water inlet valve screen for clogs. If necessary, replace the water inlet valve to restore water flow. In some cases, wiring issues or a faulty electronic control board could be the cause.

Dishes not drying

Plastic items may retain water due to their lower heat retention, but all dishes benefit from using rinse aid for better drainage. If the rinse aid dispenser isn’t working, replace it. You can also select a heated drying option for improved results. When dishes still come out wet, you may need to replace a failed heating element, a tripped high-limit thermostat, or a malfunctioning vent or fan.

Leaks or drain issues

If you find water under or around your dishwasher, check for a cracked drain hose and replace it if damaged. Our step-by-step guide for replacing a dishwasher drain hose can help you do it yourself.

Why choose OEM Fisher & Paykel dishwasher parts

Using manufacturer-approved parts ensures a precise fit, optimal performance, and the same durability you expect from your Fisher & Paykel appliance. At Sears PartsDirect, we make it easy to find and order the right OEM parts for your model, so your dishwasher can get back to delivering the premium results you bought it for.

Get repair help

Explore our full library of step-by-step guides and troubleshooting tips on the dishwasher DIY repair help page to fix common Fisher & Paykel dishwasher problems.

Fisher & Paykel dishwasher FAQs

What should I do if my dishwasher won’t start?

Confirm it’s plugged in and the breaker hasn’t tripped. If those are fine, inspect the door latch and control panel for signs of failure.

Why won’t my Fisher & Paykel dishwasher drain?

Standing water after a cycle can be caused by a blocked drain hose, clogged filter, or faulty drain pump. Clearing debris and replacing a damaged pump usually solves the issue.

How can I stop water from leaking from my dishwasher?

Leaks often come from a worn door gasket or loose connections on the inlet hose. Replacing the gasket and tightening fittings usually resolves the problem.

What’s the best way to load my dishwasher?

Angle dishes toward the center, keep tall items on the sides, and avoid blocking spray arms. Mixing utensils in the basket prevents nesting and improves cleaning.

When should I replace my dishwasher?

If repairs exceed half the cost of a new unit, or the tub is cracked, replacement may be more cost-effective than continued repairs.