Kelvinator Side-by-side refrigerator Parts — Browse All Models

Troubleshooting your Kelvinator side-by-side refrigerator when it's not running

Check for electrical power by seeing if the interior light turns on when you open the refrigerator door.

If the interior light doesn't turn on, check the electrical outlet for power. Reset the house circuit breaker for the outlet if it's dead.

If the refrigerator has electrical power possible causes include a control board failure, a wiring problem or a failed compressor. A bad compressor start relay will also prevent the compressor from running. Follow the tips in our troubleshooting compressor problems video to figure out the problem with your refrigerator.

Cleaning condenser coils on your Kelvinator side-by-side refrigerator

• Unplug the refrigerator or shut off the circuit breaker for the refrigerator.
• To access the condenser coils, remove the bottom front toe grill. On many refrigerator models, you can pull the grill straight out and off of the refrigerator. Check your owner's manual for instructions for removing the front toe grill on your refrigerator. If the coils are under the refrigerator, remove the toe grill to access the coils.
• Push a coil brush into the condenser coils under the refrigerator. The coil brush knocks the dust off of the condenser coils. Vacuum the area to pick up the dust. After knocking the dust from the coils with a coil brush, vacuum the dust.
• Snap the bottom front toe grill onto the front of the refrigerator. Plug the refrigerator power cord back into the wall outlet.