Kenwood Home theater system Parts — Browse All Models

Maintenance tips for your Kenwood home theater system

• Unplug the home theater system's power cord from the electrical wall outlet before performing any cleaning and maintenance on the system.
• Remove the amplifier's cabinet cover. Spray canned air through all ventilation slots of the cabinet to clear out dust and debris that can interfere with airflow through the cabinet.
• Carefully blow dust and debris from internal components in the amplifier.
• Use electrical contact cleaner to remove corrosion and deposits from all jacks, plugs and switches. Allow the cleaner to dry completely before reassembling the amplifier.
• Wipe down all external amplifier cabinet surfaces using a damp micro-fiber cloth. Dry the surfaces with a lint-free cloth.
• Reassemble the amplifier and plug the power cord back into the electrical wall outlet.

Top replacement parts for Kenwood home theater systems

• Fuse. The fuse in the amplifier blows when the home theater system draws too much current through the power cord because of a short circuit in an amplifier component or wiring.
• Power cord. The power cord supplies the home theater system with electrical current from the electrical wall outlet.
• Main electronic control board. The main electronic control board governs the settings and functions of the amplifier and powers the components inside the stereo amplifier.
• Remote control. The remote control communicates control and setting selections to the home theater system using RF (radio frequency) signal. The remote control allows you to operate the home theater system and make setting selections from a remote location.