Official Kubota grass catcher attachment parts

Storing your Kubota grass catcher attachment at the end of the cutting season

• When the grass catcher attachment is to be stored until the next cutting season, clean the entire attachment thoroughly. Wash all parts to remove dirt, grass, leaves and other debris.
• Use a mild detergent to clean stubborn deposits and debris from storage bins and parts. Rinse parts with plain water to remove detergent residue.
• Allow the grass catcher attachment to dry completely after cleaning.
• Don't leave grass in the bagger containers. Leaving grass in the containers can result in spontaneous combustion—which could develop into a fire.
• Store the grass catcher attachment in a clean, dry place.

Mounting the Kubota grass catcher attachment to the lawn tractor

• Raise the seat on the lawn tractor to access the mounting location.
• With the grass catcher cover closed, lift the grass catcher assembly and place the support post inside the mounting bracket. Allow the grass cater assembly to rest on lanced tabs of the mounting bracket.
• Line up the holes in the mounting bracket with holes in the support post and insert the bracket support pin. Secure the support pin with the retainer spring.
• Unlatch and open the grass catcher cover. Install the tubing end caps onto the container support. Tap each end cap on to the container support to seat them securely.