Weslo Weight machine Parts — Browse All Models

Tightening the cables on your Weslo weight machine

• Cables stretch over time so inspect the slack in all weight machine resistance cables before using the weight machine each time.
• Tighten any loose cables to eliminate slack before using the weight machine. Don't overtighten the cables.
• To tighten cables that use a bolt and locknut adjustment, slide the cable stop away from the cable clip. Use a pair of pliers or a screwdriver to tighten the locknut on the bolt that goes into the cable clip to shorten the cable and remove slack. Slide the cable stop against the cable clip.
• To remove slack from a cable with adjustable sets of holds in a U-bracket, remove the nut and bolt that hold the adjustable cable pulley in place and move the bolt up to hold the pulley in a higher set of holes to remove cable slack. Reinstall the nut and tighten it firmly to hold the bolt and pulley in place.

Top-selling Weslo weight machine replacement parts

• Cables. Weight machine cables connect arms and handles to their weight stacks.
• Pulleys. Pulleys support and guide cables through the weight machine frames.
• Weight tubes. Weight tubes support and guide weights up and down on the weight stacks.
• Fasteners. Fasteners such as bolts, nuts and screws can loosen and fall out over time. Replace any missing fasteners on the weight machine before use.