Kettler Fitness & exercise Parts — Browse All Models

Replacing the control console on your Kettler elliptical exercise machine

• Remove the mounting screws from the console bottom.
• Pull the control console up to access the wire harness plug on the bottom of the console. Release the wire harness plug locking tab and disconnect the console wire harness.
• Position the new control console near the top of the console mounting frame and connect the console wire harness to the new control console.
• Reinstall the console mounting screws to secure the new control console to its frame.
• Install batteries in the new control console.

Top repair parts for Kettler elliptical exercise machines

• Resistance motor. The resistance motor changes the distance of the C-magnet from the flywheel to adjust the pedal resistance.
• Tension cable. The tension cable attaches to the C-magnet and adjusts the distance between the C-magnet and the flywheel to vary the resistance.
• Reed switch. The reed switch detects a magnet attached to the rotating crank arm pulley to sense speed and sends the speed signal to the console.
• Console. The console controls pedal resistance and displays time, distance, resistance level and other settings and readings.