Hitachi Power stapler Parts — Browse All Models

Charging the battery for your Hitachi power stapler

• Plug the battery charger outlet cord into the wall outlet before inserting the battery onto the charger.
• Slide the battery onto the charger. Make sure that the battery is fully seated on the charger.
• The red LED light will blink constantly to indicated that the battery is fully seated and the battery charging process has begun.
• The battery is completely charged when the red LED lights remains on constantly.
• The battery can be left in the charger without harming the battery.
• To remove the battery, press the battery release button and slide the battery off the charger.

Safety tips to follow when using bump action on your Hitachi power stapler

• When using the bump action feature, be careful to avoid unintentional double fires of the power stapler caused by accidentally allowing the contact trip to re-contact the work surface due to recoil.
• To avoid double fires of the power stapler, don't engage the power stapler against the work surface with strong force. Allow the tool to recoil fully after each actuation.
• Always keep the power stapler in control when using the bump actuating mode. Inaccurate placement of the tool can result in misdirected discharge of staples.
• Be aware of material thickness when driving staples. Don't leave protruding staples in the work because protruding staples can cause injury.
• Don't drive staples blindly into walls or other surfaces. Staples driven into live electrical wires or plumbing can result in injury and/or property damage.