WILL THIS PART FIT MY MODEL?

kenmore-6931EL3003D-Dryer High-Limit Thermostat
Hover to Zoom

Dryer High-Limit Thermostat 6931EL3003D

★★★★★★★★★★
5
5
4
5
3
3
2
0
1
2

Part #6931EL3003D

Online price
$20.99
In Stock
For ZIP codes near Edit
365-day return policy
This part fits
Kenmore, Kenmore Elite, LG

Part Information

This high-limit thermostat (part number 6931EL3003D) is for dryers.

High-limit thermostat 6931EL3003D shuts off the heating element or burner when the dryer overheats.

Disconnect the power before installing this part. Wear work gloves to protect your hands.

Top models using the same part

Model NameModel NumberDiagram Name
Model #DLEX9000W LG dryerDLEX9000W
Drum parts
Model #DLEX5000V LG dryerDLEX5000V
Drum parts
Model #DLEX8500V LG dryerDLEX8500V
Drum and motor parts
Model #DLEX9500K LG dryerDLEX9500K
Drum and motor parts
Model #DLEX8100W LG dryerDLEX8100W
Drum and motor parts
Model #DLEX9000V/00 LG dryerDLEX9000V/00
Drum parts
Model #DLEX5000W LG dryerDLEX5000W
Drum parts
Model #DLEX8000V LG dryerDLEX8000V
Drum and motor assembly parts
Model #79681073310 Kenmore Elite dryer79681073310
Drum and motor assembly parts
Model #DLE7300VE/00 LG dryerDLE7300VE/00
All parts

Reviews

1-8 of 15 reviews
TD5280
Denver, COReviews 1Votes 1
★★★★★★★★★★
• 1 year ago
TD5280• 1 year ago
Easy fix!

Super easy - saved $200 repair bill. So happy to get it!

Martins
Reviews 1Votes 2
★★★★★★★★★★
• 1 year ago
Martins• 1 year ago
Kenmore Dryer

The part can actually be installed from the back of the machine. One screw to remove the exhaust duct and all three thermostats are accesible.

Jason34
Orange, TxReviews 1Votes 1
★★★★★★★★★★
• 2 years ago
Jason34• 2 years ago
Easy install!

It was a quick an easy install only took about 30 minutes.

rogerwhowoever
Sumter, scReviews 2Votes 3
★★★★★★★★★★
• 3 years ago
rogerwhowoever• 3 years ago
easy to install and repair

great DIY project, easy to install and trouble shoot the problem. Release the catches on the top of the drier by using a puddy knife, lean the top against the wall, remove the front of the drier(remove the screws holding the door and front) you don't have to unplug the door switch. Locate the heating assy. on the lower right of the drier, remove one mounting screw on the front holding the heater to the bottom of the drier. Pull the heating assy forward from the back of the drier, remove the wires attached to the thermostat and the front heat sensor (label wires) install new thermostat. Attach wires and install the heating element . (may have to twist heating element back and forth to get it to slip over the tube in the back of drier) install front door assy. insuring the door switch wire is not damaged , lower top of drier and insure it snaps over the metal clips in the front.

Dustin
BeavercreekReviews 1Votes 0
★★★★★★★★★★
• 3 years ago
Dustin• 3 years ago
Just what I needed

Took less than 10 minutes to install. Shipping was just as much as the part (about $10), so that was disappointing considering this part is the size of a ping pong ball. This did arrive a day earlier than projected though.

bob72
ArkansasReviews 5Votes 0
★★★★★★★★★★
• 3 months ago
bob72• 3 months ago
Thermostat

I would have been better served to just go ahead and purchase the heating element at a higher cost which includes two thermostats. The problem is connecting the proper wires. I have replaced every thermostat and the thermister and still had to buy the element which still shows good on the ohm meter but at a lower reading.

Jack
GreensboroReviews 1Votes 0
★★★★★★★★★★
• 1 year ago
Jack• 1 year ago
Easy to install

It was easy to install and took less than 15 minutes to install

Kamokin
FreeportReviews 1Votes 0
★★★★★★★★★★
• 2 years ago
Kamokin• 2 years ago
Easy installation.

Quick and easy. Saved a ton of money. Delivery however, took longer than it was supposed to.

1-8 of 15 reviews