$140.36 |Â
7% OFFÂ Phone Price : $150.36
CONFIRM THE PART FITS
Washer Tub-to-Pump Hose W10609566
Part #W10609566
Replaced by #W11366249
?
Manufacturer substitution
This part replaces W10609566. Substitute parts can look different from the original.
Online Only Price
$23.95 |Â
17% OFFÂ Phone Price : $28.95
In Stock
For ZIP codes near Edit
Part Information
This tub-to-pump hose (part number W11366249) is for washers.
Tub-to-pump hose W11366249 carries the water from the tub to the drain pump.
Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $19.97 |Â23% OFFÂ MSRP : $26.00
- $45.35 |Â30% OFFÂ MSRP : $65.00
- $20.60 |Â38% OFFÂ MSRP : $33.00
- $305.59 |Â$10.00 OFFÂ Phone Price : $315.59
- $117.37 |Â22% OFFÂ MSRP : $150.00
- $23.21 |Â18% OFFÂ Phone Price : $28.21
- $126.08 |Â10% OFFÂ MSRP : $140.00
- $78.71 |Â21% OFFÂ MSRP : $100.00
- $16.03 |Â11% OFFÂ Phone Price : $18.03
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #11041952710 Kenmore washer | 11041952710 | Pump and motor parts |
| Model #CGT9000GQ0 Whirlpool laundry center | CGT9000GQ0 | Washer pump & motor parts |
| Model #CGT9100GQ0 Whirlpool laundry center | CGT9100GQ0 | Washer pump & motor parts |
| Model #MLG22PNAGW0 Maytag laundry center | MLG22PNAGW0 | Pump and motor parts |
| Model #MLG22PDAGW0 Maytag laundry center | MLG22PDAGW0 | Pump and motor parts |
| Model #MLE22PNAGW0 Maytag laundry center | MLE22PNAGW0 | Pump and motor parts |
| Model #MLG20PDBGW3 Maytag laundry center | MLG20PDBGW3 | Pump and motor parts |
| Model #MLG20PDAWW0 Maytag laundry center | MLG20PDAWW0 | Pump and motor parts |
| Model #MLE20PDAZW0 Maytag laundry center | MLE20PDAZW0 | Pump and motor parts |
| Model #MLE20PRAZW0 Maytag laundry center | MLE20PRAZW0 | Pump and motor parts |
Reviews
Easy to install
The hose was easy to install. However, I also ordered the new hose clamp, but there appears to be a possibility that the hose could be damaged by the hose clamp in the area where the sensor hose Y's off. The hose clamp is just a little to wide, which could cause the clamp to eventually cut into the hose. I actually cut a heavy piece of cloth and placed it between the clamp and hose at the site that was questionable. Hopefully that will eliminate or at least prolong any future damage to the hose. Other than that, it installed perfectly.
James, Fort Smith AR
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Difficult to install but worth the effort.
It works as designed. Difficult to replace because of location. Correct tools would have helped.
Validator, In the country, Western Panhandle
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Washer part
Washer Tub to pump boot replacement was easy to replace when you have the correct part.
Sdulemba, Ohio
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Installation
The clamp that the part must be installed with is very rigid. I had to use an adjustable hose clamp in order to install the Washer Tub-To-Pump Home. Because of that part, it took almost an hour to install.
casaroman, New Windsor, NY
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours