Refrigerator Water Filter Head and Tubing DA97-08006D

It works

The instructions I found online for replacing this filter head were sketchy, so I had to figure a few things out for myself. 1) unplug the frig, turn off the water, and remove the shelf above the filter housing 2) remove the 3 outer screws (one is all the way at the back, hidden from view) 3) slide the house forward about an inch to lift it off the tab lock holding it in place (on the bottom as you look inside the housing) 4) cut the label at the back of the housing holding the two sides together 5) pop the 3 tabs on top and 3 tabs on bottom (be careful not to break them) ** because of the wiring, I was not able to completely separate the two sides of the housing 6) remove the two screws holding the filter head 7) remove the two red clips where the hoses enter the filter head 8) push down on the gray while pulling the hoses out (this takes some coordination - might need a pair of pliers); ** the white hose will likely leak 9) remove the white hose from the new filter (was not needed) 10) follow steps 1-8 in reverse to install new filter.