$51.78 |
35% OFF MSRP : $80.00
CONFIRM THE PART FITS
Part Information
This fill and drain hose assembly (part number W10842407) is for dishwashers.
Fill and drain hose assembly W10842407 connects to the kitchen faucet to supply fill water to the dishwasher and to carry the drain water to the sink.
Follow the instructions in the owner's manual when installing this part.
Frequently Used Together
- $37.85 |12% OFF Phone Price : $42.85
- $21.15 |19% OFF Phone Price : $26.15
- $239.05 |$10.00 OFF Phone Price : $249.05
- $238.11
- $162.81
- $102.47
- $27.74 |21% OFF MSRP : $35.00
- $57.75 |22% OFF MSRP : $74.00
- $78.59 |6% OFF Phone Price : $83.59
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #WDP350PAAW6 Whirlpool dishwasher | WDP350PAAW6 | Cabinet parts |
| Model #MDC4809PAB0 Maytag dishwasher | MDC4809PAB0 | Tub and frame parts |
| Model #66517749K013 Kenmore dishwasher | 66517749K013 | Cabinet parts |
| Model #DP1040XTXB4 Whirlpool dishwasher | DP1040XTXB4 | Cabinet parts |
| Model #DP1040XTXQ4 Whirlpool dishwasher | DP1040XTXQ4 | Cabinet parts |
| Model #66517742K014 Kenmore dishwasher | 66517742K014 | Cabinet parts |
| Model #66517152K211 Kenmore dishwasher | 66517152K211 | Cabinet parts |
| Model #66517159K216 Kenmore dishwasher | 66517159K216 | Cabinet parts |
| Model #66517159K212 Kenmore dishwasher | 66517159K212 | Cabinet parts |
| Model #WDP350PAAW4 Whirlpool dishwasher | WDP350PAAW4 | Cabinet parts |
Reviews
Hard to remove old fill/deain assembly.
When I found out the problems(too many corners that were hard to get the hoses through) in removing the old one, I decided against installing the new one.
Jay 7, PA
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
INCOMPETENT
I don't know why I received this order, as I had cancelled it and a refund was to have been processed as of 5/23/2020 because it was taking too long, and in the meantime I was able to get a part from a shop nearby my home installed several weeks ago. If you want it back you'll have get a hold of me.
Undisclosed, Omaha, NE
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Coupler and hose replacement.
I originally purchased what was a coupler repair kit, but my model wasn't adaptable, so it's a shame I had to buy the entire hose assembly. I was tempted to just take the new coupler apart and repair the old one, but figured why tempt fate. It was very easy to replace the assembly as a whole. I didn't need the new plastic frame, the old one sufficed. I looked at you tube videos, but they actually weren't very helpful. I took the frame off, and the cutting board. Very odd that there were stars, hex, and phillips heads on the screws, but no big deal. Used a drill, made quick work of it. Got the frame off. All you need is a zip tie to tie the new hoses back together near where they insert. You'll need slip joint pliers to remove the clamp off of one hose, and perhaps loosen the other because it screws on. Once the old hoses are off, put the new ones on. Set the thing back up, match the holes up for the screws. All told I think there were three on each side, plus three holding the cutting board. That slides out by the way, don't raise it up. If you have to tap it on the back to get it going forward to remove it, do that. Took me and another person about 20 minutes all told, simply because we were kind of guessing when we started.
Robert O f P, Western PA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Replace dishwasher fill & drain hose
45 min to an hour to remove and install, now need to take apart and adjust the hose to lay right
Virgil, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour