Emco MAXIMAT V10-P lathe Parts

For the Emco MAXIMAT lathe model MAXIMAT, the most commonly referenced “size” is the machine’s swing and distance between centers. Many MAXIMAT V10 and V10-P machines are described as about 5 in. swing with roughly 25 in. between centers; confirm your exact configuration before ordering parts.

What “big” usually means on a lathe

When people ask how big an Emco MAXIMAT is, they typically mean one (or more) of these specs:

• Swing over bed (maximum turning diameter)
• Distance between centers (maximum work length between centers)
• Overall footprint (bench/stand space needed)
• Spindle bore (max bar stock through the spindle)
• Weight (important for benches, stands, and moving)

Quick reference: common MAXIMAT size terms

Spec you’re looking for	What it tells you	Why you care
Swing over bed	Max diameter you can turn	Determines project diameter limits
Distance between centers	Max length you can turn	Determines shaft and rod length limits
Footprint	Space the lathe occupies	Helps plan bench and shop layout
Weight	How heavy the machine is	Impacts moving, mounting, vibration

How to confirm the exact size of your MAXIMAT

Because “MAXIMAT” can refer to multiple variants and setups (bench mount, stand, milling attachment, power feed options), we recommend verifying your machine’s actual measurements:

• Measure swing: center of spindle to bed, then double it.
• Measure between centers: install centers and measure usable length.
• Note any attachments (milling head, stand, guards) that change footprint.
• Match your identification plate and casting marks to the correct parts listing.
• Use our model search on Sears PartsDirect to pull up the closest match if your tag includes additional identifiers.

Why it matters

Lathe size affects tool selection (toolpost, chuck size, centers), workholding limits, and which replacement parts fit correctly, especially on assemblies like the carriage, cross slide, and leadscrew.

Last updated: February 2026

The “best” lathe depends on what you need to make: for small, high-precision production parts, a Swiss-type lathe is often the top choice; for general turning, facing, and threading, a quality engine lathe like the Emco MAXIMAT can be an excellent fit when it matches your work size and accuracy needs.

Quick way to choose the right “best” lathe

Use these factors to match the machine to your work, not the other way around:

• Part size and length-to-diameter ratio: long, slender parts favor a Swiss-type setup
• Tolerance and finish requirements: tighter tolerances push you toward more rigid, precise machines
• Material: aluminum and plastics are forgiving; stainless and tool steel demand rigidity and horsepower
• Production volume: one-offs and prototypes differ from repeat production
• Tooling and features: quick-change toolpost, threading capability, power feed, and collet support

Common lathe types and what they are best at

Lathe type	Best for	Typical tradeoff
Swiss-type lathe	Small, ultra-precise parts; long L/D work	Higher cost; specialized setup
Engine (manual) lathe	General-purpose turning, threading, repair work	Slower for high-volume production
Toolroom lathe	Precision manual work; fine feeds and controls	Costlier than basic engine lathes
CNC lathe	Repeatability and production efficiency	Programming, higher upfront cost

Why Swiss-type lathes are often called “the best” for precision parts

Swiss-type lathes support the bar close to the cut with a guide bushing, which reduces deflection. That support is a big advantage when you are turning small diameters or long, thin parts where chatter and taper are common problems.

Why it matters

Choosing the right lathe protects accuracy, surface finish, and tool life. A machine that is “best” for micro-precision production can be a poor fit for larger repair work, and vice versa.

Parts and support for your Emco lathe

For Emco MAXIMAT (model MAXIMAT) parts and diagrams, start with the parts list for your machine; for broader parts searching by model number and category, use Sears PartsDirect.

Last updated: February 2026

A lathe (like the Emco MAXIMAT lathe) spins the workpiece while the cutting tool shapes it, so it is best for round parts such as shafts, bushings, and threads. A milling machine typically spins the cutting tool and moves the workpiece to create flats, slots, pockets, and complex shapes.

How each machine “moves” to cut

• Lathe: the workpiece rotates in the chuck or between centers; the tool feeds along or across the spinning part.
• Mill: the cutter rotates in the spindle; the table (or head) moves to position the work under the cutter.
• Lathe strength: concentric accuracy on cylindrical work.
• Mill strength: versatility for non-round geometry.

Common jobs: lathe vs. mill

Task	Lathe	Milling machine
Turn a diameter on a shaft	Best choice	Possible with fixtures, not typical
Cut external or internal threads	Common	Possible with thread milling or tapping
Face a part square	Common	Common
Cut a keyway or slot	Possible with attachments	Best choice
Make a flat surface on a block	Not typical	Best choice

What to consider for your shop

• Part shape: mostly round parts point to a lathe; mostly prismatic parts point to a mill.
• Tooling needs: chucks, centers, and toolholders for lathes; vises, collets, and end mills for mills.
• Setup time: mills often need more fixturing; lathes often center faster for round stock.
• Space and power: both can be heavy and require stable mounting and proper electrical supply.
• Safety: both require eye protection, chip control, and avoiding loose clothing near rotating parts.

Why it matters

Choosing the right machine reduces setup time, improves accuracy, and helps you avoid forcing a tool to do a job it is not designed for. That typically means better finishes, fewer broken cutters, and more consistent results.

For model-specific parts lookup and diagrams for your Emco MAXIMAT, start with the parts list for this model; for broader searching by model number, use Sears PartsDirect.

Last updated: February 2026