Where is Suncast manufactured?
Suncast manufactures products in the United States; Suncast Commercial reports manufacturing at its facility in Batavia, Illinois, and some products can include components sourced globally. For your Suncast hose reel model 71-69622, the most reliable way to confirm origin is to check the product label or packaging details.
Look for these common identifiers on the reel frame, carton, or rating label:
- “Made in …” or “Assembled in …” country statement
- A factory code or lot/date code near the model number 71-69622
- A UPC label on the box that may list the country of origin
- Any molded-in markings on the plastic housing
- A sticker near the handle, inlet fitting, or hose guide
Suncast sells multiple product lines (including consumer and commercial). Manufacturing location and component sourcing can differ by line and by production run.
| What you see on the label | What it usually means |
|---|---|
| Made in USA | Product is manufactured in the U.S. |
| Assembled in USA | Final assembly is in the U.S.; parts may be sourced elsewhere |
| Made in (country) | Product is manufactured in that listed country |
Knowing where your hose reel was made helps when you are matching replacement parts, fittings, or hardware (for example, inlet connection style, fastener type, or material). If you need to look up parts by model number, start with the parts list for 71-69622 or search by model on Sears PartsDirect.
Last updated: February 2026
Why is my Suncast hose reel leaking?
A Suncast hose reel like model 71-69622 usually leaks because a connection is loose, a rubber washer is missing or worn, or the in-tube fitting is not sealing. Tighten the fittings first, then inspect and replace any flattened or cracked washers.
- Hand-tighten the garden hose connection at the reel inlet (do not overtighten with pliers).
- Check for a missing, split, or flattened rubber washer in the female hose coupling.
- Inspect the washer or O-ring at the reel’s in-tube connection (where water enters the reel).
- Reseat the hose end squarely; cross-threading causes leaks even when “tight.”
- Look for hairline cracks in plastic fittings, especially after freezing weather.
| Leak location | Most common cause | What to do |
|---|---|---|
| At the spigot-to-hose connection | Worn/missing hose washer | Replace the hose washer; retighten |
| At the reel inlet fitting | Loose coupling or damaged threads | Reseat and hand-tighten; replace damaged coupling |
| From the in-tube area | Worn internal washer/O-ring | Replace the sealing washer/O-ring; ensure proper seating |
| From the hose itself | Split hose or loose clamp | Replace hose or clamp |
Even a small drip can waste water and can pull air into the line, which reduces flow at your nozzle or sprinkler. Leaks also accelerate wear on plastic threads and fittings on hose reels.
- Assorted garden hose washers (standard 3/4-inch hose thread)
- Plumber’s silicone grease (for O-rings, if present)
- Thread-safe tape only if the connection is a tapered pipe thread (most hose threads seal with a washer)
If you need help identifying the correct replacement items for your 71-69622 hose reel, search by model number on Sears PartsDirect.
Last updated: February 2026
How do I find the model number on my 71-69622?
For your Suncast hose reel, the model number is usually printed on a small label or molded into the plastic on the reel frame or housing. Once you find it, match it exactly to 71-69622 so you get the right diagrams and replacement parts on [how to find your appliance model number (and what it means for parts)].
Check these common spots first (use a flashlight and wipe off dirt):
- Back side of the reel housing or side panel
- Underside of the base or foot plate
- Near the handle, crank, or guide arm area
- On the cart frame crossbar (if it is a cart-style reel)
- Inside the cover door (if your reel has a cabinet-style enclosure)
On outdoor home improvement items, the ID is often subtle.
| What you see | What it means | What to do |
|---|---|---|
| Sticker/label with numbers and letters | Model/serial info | Write it down exactly, including dashes |
| Molded or stamped numbers in plastic | Often the model or a mold code | Look for the full model format like 71-69622 |
| Multiple numbers | Could include patent, mold, or date codes | Use the one labeled “Model” or that matches the 71-69622 format |
- Use the full model number including the dash: 71-69622
- Compare your hose reel style (wall-mount, cart, cabinet) to the diagrams for the model
- If the label is missing, use distinctive features (handle style, hose guide shape, enclosure type) to narrow the match
Suncast hose reels can look similar across model families; the correct model number ensures the parts list and diagrams match your exact frame, fittings, and hardware.
Last updated: March 2026