McCulloch MS1415 electric chainsaw Parts

Yes. Your Mcculloch MS1415 electric chainsaw needs bar-and-chain lubrication; running the bar and chain dry creates heat and friction that quickly dulls the chain and wears the guide bar. On this model, oil is fed to the bar and chain when you press the oil cap.

Follow the lubrication steps in the owner's manual. For this saw, the oiler is manual (you press the oil cap to feed oil).

• Fill the oil tank with bar and chain oil before use.
• Press the oil cap at least once before each cut.
• Check the oil level before starting and often during use.
• Use the oil sight level hole (left side of the saw, between the front handle and front hand guard) to monitor level.
• Do not operate the oiler while actively cutting.

Too little lubrication reduces cutting efficiency and shortens chainsaw life.

Proper bar and chain oiling protects the guide bar, drive sprocket contact surfaces, and cutting chain. It also helps the chain move freely and reduces the chance of rapid wear from overheating.

If you need replacements for MS1415 wear items, match parts by model number and the exact part listing.

• Chain: 14" chain 91PXL049G
• Guide bar: bar:14" 140SDEA318
• Trigger control (if the saw will not run): browse the trigger listing on this page

You can also search by model number on Sears PartsDirect if you are looking for additional MS1415 parts.

Last updated: February 2026

For the Mcculloch MS1415 electric chainsaw, we use chain, bar and sprocket oil in the chain oil tank (bar oil). Fill the oil tank with a funnel, wipe up spills, and keep dirt and sawdust out of the tank; see the owner's manual.

• Use chainsaw bar oil labeled for chain, bar and sprocket lubrication.
• Use a biodegradable bar oil if you prefer a more environmentally friendly option.
• Do not use used motor oil; it does not lubricate consistently and can increase wear.
• Do not run the saw with an empty oil tank; the chain and guide bar can overheat quickly.

1. Unplug the chainsaw.
2. Clean around the oil cap so debris cannot fall into the tank.
3. Use a funnel to fill with chain, bar and sprocket oil.
4. Tighten the cap and wipe off any oil on the housing.
5. Check the oil level before each cutting session.

Bar oil is what protects the chain, guide bar, and drive components from heat and friction. Using the right oil and keeping the tank topped off helps the saw cut smoother and extends the life of wear parts like the 14" chain 91PXL049G and the guide bar.

• Chain (stretches faster, dulls quicker)
• Guide bar (rails wear, bar can discolor from heat)
• Sprocket area (accelerated wear)

If you need replacements, we stock MS1415 wear items on this model’s parts list, and you can also search by model number on Sears PartsDirect.

Last updated: February 2026

The model number for your Mcculloch electric chainsaw is printed on the product identification label on the saw housing. On the MS1415, confirm the label shows MS1415 before ordering parts or using specifications from the MS1415 owner's manual.

Check these common label locations on an electric chainsaw like the Mcculloch MS1415:

• On the main body housing near the rear handle
• On the underside of the motor housing
• Near the power cord entry point (strain relief area)
• Close to the oil tank cap area
• Near the bar mount side cover area

Record the details exactly as shown on the label:

• Model number (MS1415)
• Brand name (Mcculloch)
• Any type or product number listed with the model
• Electrical rating (often shown as 120V, 60Hz, 8A)

Use this as a sanity check after you find the label.

Mcculloch manuals and parts lists often cover multiple models (for example, MS1210, MS1215, and MS1415). Using the exact model number prevents ordering the wrong bar, chain, trigger, or gear motor for your saw.

Last updated: March 2026