Briggs & Stratton 190402-6151-01 engine Parts

Yes. We still carry replacement parts for the Briggs 190402-6151-01 lawn and garden engine, including common service items like ignition, carburetion, seals, and starter components. The key is matching the exact engine model and type code so you get the correct fit and function.

How to make sure you order the right part

Use the full model number 190402-6151-01 and then match the part by name and part ID. For example, if you suspect a sheared flywheel key after a sudden stop, the correct replacement is the Briggs & statton key 222698S.

• Confirm the engine model is 190402-6151-01 (not just “190402”).
• Compare the part name and part ID, not only the price.
• Replace gaskets or seals you disturb during disassembly.
• If the engine won’t shut off, check the kill circuit and switch wiring.
• If it runs rough or surges, focus on fuel quality and carburetor condition.

Common parts customers replace on this engine

These are typical “first checks” when troubleshooting starting, running, or leaking issues.

Symptom	Likely area	Example part for this model
Won’t start or weak spark	Ignition/kill circuit	Briggs & Statton Lawn & Garden Equipment Engine Ignition Module (part ID 398811)
Runs poorly, surges, won’t idle	Fuel/carburetion	Briggs & Statton Carburetor (part ID 394693)
Oil leak near crank area	Seals	Briggs & Statton Oil Seal (part ID 391086S)
Recoil starter slips or won’t rewind	Starter hardware	Briggs & Statton Lawn & Garden Equipment Engine Recoil Starter Pulley (part ID 295871)

Why it matters

Small-engine parts are highly model-specific. Ordering by the exact 190402-6151-01 identifier helps prevent no-fit returns and avoids issues like incorrect ignition timing, fuel delivery problems, or repeat oil leaks.

Last updated: February 2026

To get the correct specs for your Briggs engine, match the identification numbers stamped on the engine to your exact model. For Briggs 190402-6151-01, the most reliable path is using the Model, Type, and Code numbers from the engine shroud or blower housing so the specs (HP, displacement, tune-up parts) match your build.

Where to find the Model, Type, and Code numbers

On most Briggs lawn and garden engines, the numbers are stamped or printed on the engine, not on the mower or tractor frame. Check these common locations:

• Blower housing (recoil starter shroud)
• Valve cover area
• Muffler heat shield
• Near the spark plug
• On a metal tag or stamped pad on the engine casing

How to use those numbers to look up specs

Once you have the Model, Type, and Code, use them together. The Code is especially important because it identifies the production date and can change the correct carburetor, ignition, and gasket details.

• Write the numbers exactly as shown (including dashes)
• Use the full set: Model + Type + Code
• Compare your findings to the parts list for 190402-6151-01 to confirm fit

Quick ID guide

Number	What it tells you	Why it matters
Model	Engine family/series	Narrows down core specs like displacement
Type	Exact configuration	Matches carburetor, governor, and fuel system setup
Code	Build date/version	Prevents ordering the wrong revision of parts

If you are missing the tag or the stamp is hard to read

Use these practical checks to confirm you are in the right engine family before ordering parts:

• Compare the carburetor style to Briggs & statton carburetor 394693
• Verify your ignition kill setup if your engine uses a stop switch (common on walk-behind equipment)
• Cross-check recoil starter components if you have pull-start hardware

Why it matters

Briggs engines often share the same Model number across multiple Type and Code variations. Using all three ID numbers ensures the specs you find (and the parts you buy, like a carburetor, ignition module, or gasket set) match your exact 190402-6151-01 build.

Last updated: February 2026

A typical lawn mower engine like the Briggs 190402-6151-01 is built around fuel delivery, air intake, ignition, and rotating internal parts that create power. The exact layout varies by mower, but the core components are consistent across most small 4-cycle lawn and garden engines.

Main engine systems (what each one does)

• Fuel system: stores and meters fuel into the engine (tank, cap, carburetor)
• Air intake and filtration: keeps dirt out while feeding air (air cleaner base, filter)
• Ignition system: creates spark at the right time (ignition module, flywheel, key)
• Starting system: lets you crank the engine (recoil starter parts)
• Lubrication and sealing: holds oil in and contaminants out (oil seal, drain plug)
• Engine block and internals: converts combustion into rotation (crankcase, connecting rod, rings, cylinder head)

Common parts you may replace on model 190402-6151-01

These are some frequently serviced items we see for this Briggs model:

• Briggs & statton carburetor 394693 (fuel metering, hard-start and surging issues)
• Briggs & statton fuel cap 799719 (vents the tank; a bad cap can mimic fuel starvation)
• Briggs & statton lawn & garden equipment engine ignition module 398811 (no-spark problems)
• Briggs & statton key 222698S (flywheel timing key; can shear after a sudden stop)
• Briggs & statton oil seal 391086S (oil leaks around a shaft)
• Briggs & statton plug 690946 (oil drain plug for oil changes)

Quick “system to part” map

Engine system	What you’ll notice when it fails	Example part on this model
Fuel delivery	Won’t start, surges, dies under load	Carburetor
Ignition	No spark, backfires, intermittent run	Ignition module, flywheel key
Starting	Rope won’t retract, won’t crank smoothly	Recoil starter pulley/cup
Lubrication/sealing	Oil leak, low oil level	Oil seal, drain plug

Why it matters

Knowing the engine’s major systems helps you troubleshoot faster and buy the right repair part the first time. For example, a “starts then dies” complaint usually points to fuel delivery or tank venting, while a true “no spark” points to ignition components.

Last updated: February 2026