Kenmore 25360722000 refrigerator Parts

For Kenmore refrigerator model 25360722000, the model number is printed on the serial plate inside the fresh food compartment; it’s typically on the upper left wall. Use that exact model number when ordering parts or checking operating instructions in the 25360722000 owner's manual.

• Open the refrigerator door (fresh food section, not the freezer)
• Look along the upper left interior wall
• Find the serial plate or model and serial number plate
• Write down the model number and serial number exactly as shown
• Take a clear photo so you can zoom in later

We use the model number to match the correct Kenmore parts list and diagrams. Even small model changes can affect fit and wiring, especially for cooling-system and defrost components.

Once you confirm the model number, match parts by description and ID. For example, if you’re servicing the sealed system, the filter drier 5303305677 is one of the listed components for this model.

Last updated: January 2026

Yes. For the Kenmore refrigerator model 25360722000, the most reliable “reset” is a power reset: unplug the refrigerator (or switch the breaker off) for a few minutes, then restore power and allow time for temperatures to stabilize. Use the 25360722000 owner's manual for control and power guidance.

• Turn the temperature control(s) from OFF to your normal setting if they were accidentally set to OFF.
• Unplug the refrigerator or turn OFF the circuit breaker.
• Wait 3 to 5 minutes.
• Restore power and confirm the interior light and fans come on.
• Allow cooling time; after a power interruption or disconnect, cooling recovery can take several hours.

• Outlet and plug: make sure the plug is fully seated.
• House power: check for a tripped breaker or blown fuse.
• Door seal and door closure: a slightly open door can prevent proper cooling.
• Control setting: if set too cold or too warm, give the unit time to stabilize after adjusting.
• Airflow: keep vents clear and avoid overpacking so cold air can circulate.

A power reset clears many temporary control glitches caused by a brief outage or interruption and gives the compressor a clean restart. It also helps you confirm whether the issue is power-related (outlet, breaker, control set to OFF) versus a cooling-system problem.

Last updated: January 2026

For Kenmore refrigerator model 25360722000, the cubic feet (capacity) is the total usable interior volume. The most accurate way to get the exact capacity for your specific unit is to check the model’s specifications in the 25360722000 owner's manual.

We calculate cubic feet by measuring the inside of the food compartment (not the outside cabinet) and converting cubic inches to cubic feet.

• Empty the compartment so you can measure wall-to-wall.
• Measure interior width (left to right) in inches.
• Measure interior depth (front to back) in inches.
• Measure interior height (bottom shelf/floor to ceiling) in inches.
• Multiply: width x depth x height = cubic inches.
• Divide by 1,728 to convert to cubic feet.

Outside cabinet dimensions include insulation, the sealed system space, and liners, so they overstate capacity. Interior measurements (or the spec listed in the manual) match how refrigerator capacity is defined.

• Shelving, bins, and the evaporator cover reduce usable space.
• Frost buildup can reduce usable volume and airflow.
• A door that does not seal can cause temperature swings that make the refrigerator feel “small” (food spoils faster).

If you are troubleshooting cooling or airflow while you are measuring, use how to fix your evaporator cooling fan to check common fan symptoms and airflow restrictions.

Knowing cubic feet helps us match the right replacement parts and accessories (like shelves and door bins) and helps you compare storage capacity accurately across Kenmore refrigerator models.

Last updated: January 2026

For Kenmore refrigerator model 25360722000, we unclog a drain line by flushing the drain opening with hot water and clearing the drain tube so defrost water can flow to the drain pan instead of backing up and leaking inside the cabinet. Use the steps in the 25360722000 owner's manual for safe access and handling.

• Unplug the refrigerator (turning the control to OFF stops cooling but does not remove power).
• Remove food and shelves as needed to reach the drain trough and drain hole near the back wall.
• Melt any visible ice in the drain trough with hot water (not boiling) and towels.
• Flush the drain hole using a turkey baster or squeeze bottle filled with hot water.
• Feed a flexible plastic tube, zip tie, or pipe cleaner a short distance into the drain to break up sludge.
• Repeat flushes until water runs freely to the drain pan.

If the drain is clear but water still ends up where it should not, the issue is often airflow, defrosting, or where the water is supposed to collect.

• Inspect the drain outlet area and drain pan for cracks or misalignment.
• If the unit is not defrosting correctly, ice can keep reforming and blocking the drain.
• For defrost-related problems, the upright freezer defrost timer 5304518034 is one of the components commonly checked on this model.

A partially clogged drain line can cause recurring puddles, interior icing, and moisture problems. Keeping the drain open protects flooring and helps the refrigerator maintain stable temperatures.

Last updated: January 2026