Whirlpool WEG515S0LS1 gas slide-in range Parts

Yes. Whirlpool makes gas ranges, including gas slide-in ranges like model WEG515S0LS1. These ranges use gas burners for the cooktop and typically offer multiple oven cooking modes, so you can handle everyday baking, roasting, and broiling in one appliance.

A gas range combines a gas cooktop with a gas oven in a single unit. On a Whirlpool gas slide-in range, you can expect:

• Gas surface burners that ignite with a spark system
• An oven burner that lights using an igniter/electrode
• Safety controls that manage gas flow and ignition timing
• Serviceable components such as door trim, racks, and door seals

If you are troubleshooting ignition or heat issues on WEG515S0LS1, these model-matched parts are often involved:

• Electrode, bake W11524031 (helps ignite the oven burner)
• Spark module WPW10110491 (controls spark to light burners)
• Range oven door lock assembly WPW10107820 (can affect self-clean and door locking behavior)

Knowing Whirlpool makes gas ranges helps you shop the right Whirlpool parts and troubleshoot correctly. Gas ranges rely on ignition components (electrodes, spark modules) and gas valves working together; the right model match keeps fit and function correct.

Last updated: February 2026

To reset a Whirlpool gas oven like model WEG515S0LS1, we recommend doing a power reset: turn the range off, cut power at the breaker (or unplug it), wait 1 to 5 minutes, then restore power and set the clock. This clears many temporary control glitches.

• Turn all surface burner knobs to OFF.
• If the oven is hot, let it cool and keep the door closed.
• Unplug the range or switch the circuit breaker OFF.
• Wait 1 to 5 minutes.
• Restore power, then set the clock and try Bake again.

A reset helps when the control is “stuck”, but it will not fix a failed ignition or control part. Check these common causes:

• No spark or delayed ignition: the bake igniter circuit may not be lighting reliably.
• Constant clicking: a spark system issue can keep the igniters firing.
• Door lock problems (some modes will not run if the lock system is not responding).
• Loose wiring at the igniter, spark module, or control.

If symptoms point to ignition or sparking, the model-specific parts most often involved are the electrode, bake W11524031 and the spark module WPW10110491.

A proper power reset is the fastest way to clear a temporary electronic control fault without replacing parts. If the problem returns immediately, focusing on the ignition system, door lock, or control wiring prevents repeat shutdowns and uneven baking.

Last updated: February 2026

If your Whirlpool WEG515S0LS1 surface burners work but the oven will not heat, the most common causes are a failed bake ignition system (bake igniter/electrode), a problem in the spark/ignition circuit, or an oven door lock issue that prevents heating. Start with quick checks, then test ignition parts.

• Confirm the range is getting power (clock/display on, no tripped breaker); the oven needs electricity even though it is gas.
• Make sure the oven is not in a self-clean or locked state; a stuck lock can block baking.
• Set Bake and listen: you should typically hear ignition activity and then the burner should light within about 30 to 90 seconds.
• Check for a gas supply issue affecting the oven only (partially closed shutoff valve, kinked flex line).
• If you smell gas but it never lights, stop and ventilate; do not keep retrying ignition.

For the WEG515S0LS1, these parts on our parts list are strong suspects depending on symptoms:

• Electrode, bake W11524031 (weak/no spark at the bake burner)
• Spark module WPW10110491 (no spark output to oven ignition circuit)
• Range oven door lock assembly WPW10107820 (oven thinks the door is locked or lock is stuck)

The cooktop and oven share the same gas supply, but the oven relies on its own ignition and safety controls. When the oven ignition system is weak or the door lock circuit is stuck, the oven burner will not light even though the surface burners still work.

Last updated: February 2026