Samsung NE59T7511SS/AA-00 electric range Parts

The Samsung NE59T7511SS electric range uses a 120/240-volt (or 120/208-volt) household supply and typically requires a dedicated 40-amp range circuit with a 4-wire connection. For the exact electrical rating and cord requirements for your setup, follow the NE59T7511SS owner's manual.

What to install (typical requirements)

• Dedicated range circuit (no other appliances on the same breaker)
• 40-amp double-pole breaker is the most common for this class of electric range
• 4-wire cord and receptacle (hot, hot, neutral, ground) in most installations
• Proper strain relief where the cord enters the terminal block cover
• Correct cord length and plug type for your outlet (commonly NEMA 14-50)

Quick compatibility check

Use this checklist before buying a cord or changing wiring:

Item to check	What you want to see	Why it matters
Supply voltage	120/240V or 120/208V	Ensures the oven and cooktop heat correctly
Breaker size	40A (typical)	Prevents nuisance trips and overheating
Outlet type	4-prong range outlet	Matches modern grounding requirements
Cord rating	40A, 125/250V	Matches the circuit and appliance load

If the range is not heating or keeps tripping the breaker

Power issues can look like a “bad bake element” or “dead cooktop,” so check the basics first:

• Confirm the breaker is fully reset (OFF then ON)
• Verify the outlet has correct voltage (L1-L2 and L1-N, L2-N)
• Inspect the cord and terminal block connections for heat damage
• Make sure the cord is clamped with a strain relief
• If the oven heats unevenly, test the oven sensor and consider the Samsung range oven temperature sensor DG32-00002B

Why it matters

Correct voltage and amperage protect the wiring, prevent breaker trips, and help the bake and radiant elements reach and hold temperature accurately.

Last updated: January 2026

Samsung electric ranges like model NE59T7511SS most often have heating problems (won’t heat, uneven baking, slow preheat), cooktop burner issues, and control/display glitches. These symptoms usually trace back to a failed heating element, temperature sensor, surface element, or an electronic control.

Most common symptoms we see

• Oven not heating or not reaching set temperature
• Uneven baking or temperature swings
• Broil not working or weak broil performance
• One cooktop element not heating, cycling oddly, or stuck on high
• Error codes, beeping, or a blank/unresponsive control panel
• Convection fan noise or no convection airflow

Likely causes and the parts that fix them

Symptom	Most likely cause	Example part for NE59T7511SS
Oven temp inaccurate	Temperature sensor out of range	Samsung range oven temperature sensor DG32-00002B
Oven won’t bake	Bake element open/burned	Range bake element DG47-00038B
Broil won’t work	Broil element failed	Samsung range broil element DG47-00037A
One radiant burner dead	Radiant surface element failed	Range radiant surface element, 6-in DG47-00060A
Burner won’t regulate heat	Infinite switch/control switch failing	Range surface element control switch (model-specific)

Quick checks before replacing parts

• Confirm the range is getting full power; electric ranges typically need a 240V supply (a tripped double breaker can cause partial heat).
• For oven issues, test Bake and Broil separately; if one works and the other doesn’t, the failed element is the first suspect.
• If the oven overheats or underheats consistently, the sensor is the first part to check.
• For cooktop issues, try a different burner setting and watch for normal cycling; no glow usually points to the element or switch.
• If an error code appears, match it to the code description and follow the recommended checks.

Why it matters

Heating and control problems can lead to undercooked food, long preheat times, and repeated breaker trips. Identifying whether the issue is an element, sensor, or control helps you fix the problem faster and avoid replacing good parts.

For model-specific operating steps, error code definitions, and testing guidance, use the NE59T7511SS manual and our Samsung freestanding electric range error codes.

Last updated: January 2026

No. The Samsung NE59T7511SS electric range is not a smart oven; it does not use Wi-Fi or app-based remote control. For the exact feature list and control-panel functions on this model, use the NE59T7511SS owner's manual.

What you can do on this model instead

Even without smart connectivity, you can still manage cooking accurately using the built-in controls:

• Set bake, broil, and convection modes from the control panel
• Use the kitchen timer and clock for reminders
• Adjust temperature and cook time directly on the range
• Use self-clean features (if equipped) following the manual’s safety steps
• Troubleshoot display messages and operating issues using Samsung range guidance

How to confirm whether a range is “smart”

Use these quick checks on the NE59T7511SS:

• Look for a Wi-Fi icon, “Smart Control,” or “SmartThings” wording on the display
• Check the settings menu for network or pairing options
• Review the feature section in the manual for Wi-Fi setup steps
• Compare the model number on the rating label to the manual cover page

Smart indicator	If present	If not present
Wi-Fi/SmartThings setup steps	Smart features are supported	No smart features on the range
Network or pairing menu	Connects to home Wi-Fi	Control is local only
Remote start/control wording	App control available	App control not available

Why it matters

Smart ovens add remote monitoring and app control; non-smart models like the NE59T7511SS rely on the control panel only. Knowing this helps you choose the right troubleshooting steps and avoids wasted time trying to pair an app.

Last updated: January 2026