Whirlpool WFC150M0JW3 electric range Parts

On the Whirlpool WFC150M0JW3 electric range, fixing an oven temperature sensor usually means testing the sensor circuit and replacing the sensor if it reads out of range or triggers a sensor-related error. A failed sensor commonly causes inaccurate baking, long preheat, or error codes.

• Power reset: turn off the range breaker for 1 minute, then restore power.
• Confirm the symptom: temperature swings, underbaking, overbaking, or an error code.
• Inspect the sensor harness connection at the back of the oven cavity (loose plug or damaged wires).
• Look for pinched or burned wiring where it passes through the rear wall.
• If an error code is showing, use Whirlpool freestanding range error codes to identify whether it points to the sensor circuit.

1. Shut off power at the breaker (range wiring is high voltage).
2. Remove oven racks for access.
3. Remove the mounting screws holding the sensor inside the oven.
4. Carefully pull the sensor forward until the connector is reachable.
5. Disconnect the plug, connect the new sensor, then tuck the connector back through the opening.
6. Reinstall screws, restore power, and test bake.

If you need the correct replacement for this model, use the range oven temperature sensor WPW10181986.

The oven temperature sensor is the feedback device the electronic control uses to regulate bake and broil. When the sensor is inaccurate or the circuit is open, the control cannot maintain stable temperatures, so cooking results suffer and error codes can appear.

Last updated: February 2026

To look up your Whirlpool model number, we recommend finding the appliance’s rating label first, then matching that exact model number (letters and numbers) when searching parts for your Whirlpool electric range. For model-specific parts, use the full model number like WFC150M0JW3.

On most Whirlpool freestanding electric ranges, the model and serial tag is typically in one of these spots:

• On the oven frame behind the oven door (open the door and check the front frame)
• On the storage drawer frame area (pull the bottom drawer out and look along the frame)
• Behind the control panel area (less common, but possible)
• On the back panel of the range (if the unit has been pulled out)

Copy the model number exactly as shown on the label. One wrong character can pull up the wrong diagrams and parts.

• Model number (example: WFC150M0JW3)
• Serial number (helps confirm production series)
• Brand (Whirlpool)
• Fuel type (electric range)

Whirlpool often has multiple versions that look similar but use different controls, wiring, or oven components. Using the exact model number helps ensure the replacement part fits and the repair steps match your range.

If you are troubleshooting heating or temperature issues after you identify the model, these are common parts that come up for WFC150M0JW3:

• Range oven temperature sensor WPW10181986 (helps regulate oven temperature)
• Control, electronic (lcx) black W11594224 (runs the clock, bake/broil logic, and display)
• Range terminal block WPW10245259 (power cord connection point)

Last updated: February 2026

A Whirlpool electric oven like model WFC150M0JW3 typically lasts 13 to 15 years with normal use and basic maintenance. Keeping the oven temperature accurate and fixing heating issues early helps you get the full expected life from the range.

These are the most common wear points we see on electric ranges:

• Overheating from a failing temperature sensor or control
• Running the oven with damaged door hinges or a door that does not seal well
• Heavy self-clean use (high heat stresses wiring and controls)
• Burned wiring connections at the power terminal block
• Ignoring error codes or repeated preheat failures

A few simple habits make a big difference on a Whirlpool electric range:

• Keep the oven cavity clean; wipe spills after the oven cools
• Verify baking temperatures with an oven thermometer and address drift early
• Make sure the door closes evenly and does not “drop” when opened
• If you see an error code, look it up and correct the cause instead of resetting repeatedly
• If the range ever loses power or smells hot at the back, stop using it and inspect the power connection

If your WFC150M0JW3 is heating inconsistently or throwing temperature-related faults, these model-matched parts are often involved:

• Range oven temperature sensor WPW10181986
• Control, electronic (lcx) black W11594224
• Range terminal block WPW10245259

Once an oven starts running hot or cold, it forces longer bake times and extra cycling, which increases stress on the heating system and electronic control. Correcting temperature and power-connection problems early is the simplest way to extend service life.

For display fault messages, use our Whirlpool freestanding range error codes.

Last updated: February 2026