KitchenAid
Stand Mixer

Model #KSMFVSP0 Official KitchenAid fruit/vegetable strainer

Here are the diagrams and repair parts for KitchenAid KSMFVSP0 fruit/vegetable strainer, as well as links to manuals and error code tables, if available.

There are a couple of ways to find the part or diagram you need:

  • Click a diagram to see the parts shown on that diagram.
  • In the search box below, enter all or part of the part number or the part’s name.

Not all parts are shown on the diagrams—those parts are labeled NI, for “not illustrated”.

We encourage you to save the model to your profile, so it’s easy to access parts and manuals for your appliance whenever you log in.

For DIY troubleshooting advice and repair guides, visit our repair help section.

Showing 7 of 7 parts

SHAFT ASSEMBLY#6

Attachment parts Diagram

Shaft assembly

Part #W11445840
In Stock
$56.64
STRAINER SHIELD#4

Attachment parts Diagram

Strainer shield

Part #W11445838
In Stock
$40.16
LONG GRIND SCREW#2

Attachment parts Diagram

Long grind screw

Part #W11445835
In Stock
$28.93
STRAINER CONE#3

Attachment parts Diagram

Strainer cone

Part #W11445837
In Stock
$46.60
SPLASH LID#5

Attachment parts Diagram

Splash lid

Part #W11445839
In Stock
$40.76
USE & CARE GUIDE#1

Attachment parts Diagram

Use & care guide

Part #W11329106

The manufacturer no longer makes this part, and there's no substitute part

BASE AND FOOT ASSEMBLY (REFER TO COLOR VARIATION PARTS PAGE)#7

Attachment parts Diagram

Base and foot assembly (refer to color variation parts page)

Part #N/P

The manufacturer no longer makes this part, and there's no substitute part

Symptoms common to all stand mixers

Choose a symptom to see related stand mixer repairs.

Main cause: attachment clearance setting needs adjustment
Main causes: lack of electrical power, wiring failure, worn carbon motor brushes, bad drive motor, tripped overload switch, control problems
Main causes: bad lubricating grease, mixer sitting idle for weeks at a time, mixer running constantly for more than 30 minutes
Main causes: phase control board failure, wiring connection problem, faulty electronic control board
Main causes: bad wiring connections, faulty speed control plate, electronic control board failure
Main cause: worn carbon motor brushes
Main causes: bad worm gear, damaged planetary gear assembly

Repair guides common to all stand mixers

These step-by-step repair guides will help you safely fix what’s broken on your stand mixer.

How to replace a stand mixer worm gear

Here’s how to replace the worm gear in your stand mixer if it’s worn or damaged.

Repair difficulty
Time required
 30 minutes or less
How to replace a stand mixer phase control board

The phase control board works with the governor and control plate to control motor speed. Replace the phase control board if defective.

Repair difficulty
Time required
 30 minutes or less
How to replace stand mixer motor brushes

If the carbon brushes are worn and damaged, replace them using these steps.

Repair difficulty
Time required
 15 minutes or less

Articles and videos common to all stand mixers

Use the advice and tips in these articles and videos to get the most out of your stand mixer.

August 30, 2022

How to enjoy all the online benefits we offer on our Sears PartsDirect website

By

Learn about all the convenient features on our Sears PartsDirect website that make your parts purchases easier.

August 18, 2021

Using a wiring schematic to trace a current video

By

Find out what’s wrong with your appliance by following a circuit.

September 1, 2015

Stand mixer common questions

By

These common questions and answers can help you make the most of your stand mixer.