LG LSGS6338F/00 gas range Parts

For your LG LSGS6338F gas range, start by confirming the exact model and using the part diagrams; if the part still does not appear, we recommend contacting Sears PartsDirect for help matching the correct replacement by model and serial number. Use the LSGS6338F owner's manual to verify accessory names and what came with the range.

• Recheck the model number on the range data plate and match it to LSGS6338F.
• Search using the part name (example: igniter, temperature sensor, burner cap) instead of a description.
• Try the manufacturer part number if you have it from the old part label.
• Look under the correct section (cooktop, oven burner, controls, door, racks).
• If you are replacing an oven-heat part, confirm whether the issue is bake, broil, or convection first.

Call when any of these are true:

• The part is discontinued or shows no results.
• Your part has multiple numbers printed on it and you are not sure which is the correct part number.
• You need help identifying a part from a diagram or symptom.
• You are converting fuel type or missing included accessories.

The manual lists several included and optional accessories (such as an anti-tip kit, LP nozzle conversion kit, racks, griddle, air fry tray, meat probe, wok grate). If you are searching for one of these, use the exact accessory name from the manual.

LG ranges often use similar-looking parts across multiple versions; matching by model and serial number helps ensure fit, safe operation, and correct performance.

Last updated: February 2026

On your LG gas range, the model number is printed on the appliance identification label. For model LSGS6338F, you will typically find this label on the frame area around the oven door opening or on the back of the range; match the exact characters on the label when ordering parts.

• Open the oven door and look along the front frame (around the door opening).
• Check the lower front frame area near the storage or warming drawer opening.
• Look on the back panel of the range (upper or lower area).
• If your range is installed tight to the wall, use a flashlight and mirror to read the label.

Use the full model number exactly as shown (letters, numbers, and any slashes). This ensures the correct fit for parts like an oven igniter, temperature sensor, control board, or burner cap.

• Write the model number down before you start shopping.
• Take a clear photo of the label so you can zoom in.
• If the label is greasy, wipe it gently with a damp cloth and mild soap, then dry.
• Use the model number to match parts by function (bake, broil, convection, surface burners).

LG ranges can have small design changes across production runs. Using the exact model number from the label helps us match the correct diagrams and compatible replacement parts the first time.

For additional label location details and product information, check the LSGS6338F owner’s manual.

Last updated: February 2026

If your LG LSGS6338F gas range oven is not getting hot, the most common causes are an oven control setting issue, the oven gas shut-off valve behind the range not being fully open, or a weak ignition system that cannot reliably light the bake burner. Use the LSGS6338F owner's manual troubleshooting steps to narrow it down safely.

• Confirm the oven is set to Bake (not just a timer or delayed start) and the temperature is set correctly.
• Make sure the range power cord is fully plugged into a live, properly grounded outlet.
• Check your home breaker or fuse; reset or replace if needed.
• Verify the oven gas shut-off valve behind the range is fully open.
• If the range is on LP gas and flames look very large or yellow, have the installation or conversion checked.

When the oven has power but will not heat, these parts are common suspects:

• Oven burner igniter: a weak igniter can glow but still not pull enough current to open the gas valve.
• Oven temperature sensor: a bad sensor can cause incorrect temperature feedback and poor heating.
• Oven gas valve: can fail to open even when the igniter is working.

A gas oven needs both electricity and gas flow to heat. The control board and safety circuits rely on correct ignition and temperature feedback; when any one piece is off (power, shut-off valve position, igniter strength, sensor accuracy), the oven can stay cold or underheat.

Last updated: February 2026

An LG gas range like model LSGS6338F typically lasts 13 to 15 years with normal household use and basic maintenance. Keeping burners clean, ensuring proper ignition, and addressing heating problems early helps you get the full expected lifespan; see the LSGS6338F owner's manual for care and safety guidance.

Most gas ranges reach the 13 to 15 year mark because the core system (gas valve, burner, igniter, controls) is serviceable. Lifespan is usually shortened by heavy use, poor ventilation, and repeated overheating.

• Daily high-heat cooking and frequent self-clean cycles
• Spills that clog burner ports or soak into insulation
• Weak ignition (delayed lighting) that stresses components
• Power surges affecting the display board or control board
• Skipping routine cleaning of grates, caps, and burners

The LG manual for this series highlights safe cleaning practices and options like EasyClean versus Self Clean.

• Clean cooktop parts after they cool; avoid abrasive pads on stainless surfaces
• Use EasyClean for light soils; reserve Self Clean for heavy buildup
• Keep burner caps seated correctly so flames stay even
• Wipe up boilovers quickly to prevent corrosion and clogged ports
• Confirm the oven preheats normally and holds temperature

If the oven won’t heat, heats slowly, or the flame is inconsistent, these parts are common culprits on gas ranges:

A gas range that lights promptly and holds temperature cooks more evenly, uses fuel more efficiently, and reduces the chance of ignition-related problems that can shorten the appliance’s service life.

Last updated: February 2026