Model # 5009622 Official Williams monterey top-vent home furnace

Here are the diagrams and repair parts for Official Williams 5009622 monterey top-vent home furnace, as well as links to manuals and error code tables, if available.

There are a couple of ways to find the part or diagram you need:

Click a diagram to see the parts shown on that diagram.
In the search box below, enter all or part of the part number or the part’s name.

Not all parts are shown on the diagrams—those parts are labeled NI, for “not illustrated”.

We encourage you to save the model to your profile, so it’s easy to access parts and manuals for your appliance whenever you log in.

For DIY troubleshooting advice and repair guides, visit our repair help section.

Owner’s manual

Model diagram and schematic

SEARCH WITHIN THIS MODEL

ALL PARTS

Showing 10 of 47 parts |

#7B

Face panel/front heat shield diagram

Bracket

Part #P322074

The manufacturer no longer makes this part, and there's no substitute part

#6D

Burner orifice/valve/manifold diagram

Pilot

Part #P320758

The manufacturer no longer makes this part, and there's no substitute part

Face panel/front heat shield diagram

Shield

Part #9B199

The manufacturer no longer makes this part, and there's no substitute part

#5A

Burner orifice/valve/manifold diagram

Orifice

Part #P090552

The manufacturer no longer makes this part, and there's no substitute part

Face panel/front heat shield diagram

Heat shield

Part #9C155

The manufacturer no longer makes this part, and there's no substitute part

#10

Burner orifice/valve/manifold diagram

Furnace burner igniter

Part #P322155

The manufacturer no longer makes this part, and there's no substitute part

Furnace Temperature Limit Switch P322055

#7A

Face panel/front heat shield diagram

Furnace temperature limit switch

Part #P322055

The manufacturer no longer makes this part, and there's no substitute part

#13

Face panel/front heat shield diagram

Bracket

Part #7A189

The manufacturer no longer makes this part, and there's no substitute part

#6A

Burner orifice/valve/manifold diagram

Pilot assembly

Part #P322954

The manufacturer no longer makes this part, and there's no substitute part

Burner orifice/valve/manifold diagram

Furnace wall-mounted thermostat

Part #P322016

The manufacturer no longer makes this part, and there's no substitute part

Symptoms for gas snowblowers

Choose a symptom to see related snowblower repairs.

View all

What should I do about a damaged snowblower tire?

Main causes: punctured tire, damaged rim…

Why won't my snowblower start?

Main causes: stale gas, clogged carburetor, clogged or broken fuel line, dirty spark plug, bad rewind starter, incorrect…

Why doesn't my snowblower self propel?

Main causes: loose drive clutch cable, damaged drive clutch cable, worn friction disc, scraper blade scraping the ground…

Why won't my snowblower clear snow well?

Main causes: clogged chute, snow build-up in auger housing, broken auger shear pins, auger drive belt needs adjustment, …

Why does my snowblower engine run rough?

Main causes: dirty carburetor, clogged fuel filter, dirty spark plug, incorrect valve lash, leaky engine gaskets…

Why won't my snowblower chute turn?

Main causes: snow build-up in chute, chute drive mechanism failure, bad chute control assembly…

Why doesn't my snowblower auger turn?

Main causes: broken shear pins, worn or loose auger drive belt, auger drive cable failure, damaged auger, bad gear case…

Why does my snowblower stop running after a few seconds?

Main causes: dirty carburetor, stale fuel…

Why won't my snowblower throw snow far enough?

Main causes: clogged chute, damaged auger blades, broken shear pins, worn auger belt, damaged gear case, engine problems…

Repair guides for gas snowblowers

These step-by-step repair guides will help you safely fix what’s broken on your snowblower.

View all

How to replace a snowblower fuel filter

Replace the fuel filter on your snowblower if it's clogged or damaged.…

Repair difficulty

Time required

15 minutes or less

How to adjust snowblower skid shoes

To prevent snowblower auger and shave plate damage, adjust the skid shoes regularly to keep the shave plate ¼-inch high.…

Repair difficulty

Time required

15 minutes or less

How to rebuild a snowblower carburetor

Rebuild the carburetor on your snowblower if the engine isn't getting fuel.…

Repair difficulty

Time required

45 minutes or less

Effective articles & videos to help repair your furnaces

Use the advice and tips in these articles and videos to get the most out of your snowblower.

View all

How to get your furnace ready for winter

Get expert tips for preparing your furnace for winter. Follow maintenance tips to keep your furnace in top shape.…

Introducing new technical repair content that we’re developing for the Sears Technical Institute

Learn about Sears Technical Institute and the advanced technical content being developed for aspiring appliance techs.…

Top questions about Sears and Sears PartsDirect

Model # 5009622 Official Williams monterey top-vent home furnace

Model diagram and schematic

SEARCH WITHIN THIS MODEL

Symptoms for gas snowblowers

What should I do about a damaged snowblower tire?

Why won't my snowblower start?

Why doesn't my snowblower self propel?

Why won't my snowblower clear snow well?

Why does my snowblower engine run rough?

Why won't my snowblower chute turn?

Why doesn't my snowblower auger turn?

Why does my snowblower stop running after a few seconds?

Why won't my snowblower throw snow far enough?

Repair guides for gas snowblowers

How to replace a snowblower fuel filter

How to adjust snowblower skid shoes

How to rebuild a snowblower carburetor

Effective articles & videos to help repair your furnaces

How to get your furnace ready for winter

Introducing new technical repair content that we’re developing for the Sears Technical Institute

Top questions about Sears and Sears PartsDirect

Parts & More

Stay Connected

Quick links

Let us help you

More resources