Craftsman 917370931 lawn mower Parts

To identify what kind of lawn mower you have, match the brand and model number on the mower’s ID label to the information in your documentation. For this Craftsman walk-behind mower, the model is 917370931; the Craftsman 917370931 owner's manual also confirms the model number.

Look for a sticker or metal tag on the mower; common locations include:

• Rear of the deck near the discharge opening
• Top of the deck near the engine mounting area
• Handle support brackets or the lower handle area
• Under the rear door (bagging opening) on rear-discharge models
• Near the wheel height adjuster area

For accurate parts lookup and diagrams, record these items:

• Mower model number (example: 917370931)
• Engine model and type code (engine has its own ID label)
• Serial number (helps confirm production run)
• Product type (walk-behind, self-propelled, rear discharge, etc.)

Most walk-behind mowers use:

If your mower matches Craftsman 917370931, you will see common mower components referenced in the manual, such as the discharge deflector and blade. A frequent replacement item is the husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825.

Using the exact mower model number and the engine ID prevents ordering the wrong blade, drive belt, or control cable, and it ensures the parts diagrams match your deck and drive configuration.

Last updated: February 2026

Common problems we see on the Craftsman 917370931 walk-behind mower include no-start conditions (stale fuel, dirty air filter, bad spark plug, or a loose/bent blade setup), loss of power from deck buildup, excessive vibration from a damaged blade or crankshaft, and drive issues from a worn belt or transmission parts. For model-specific troubleshooting steps, use the 917370931 owner's manual.

• Won’t start: stale fuel, water in fuel, dirty air filter, spark plug wire off, bad spark plug, control bar not held down
• Loss of power: grass and debris packed under the deck, cutting too much grass at once, dirty air filter, oil level issues
• Poor cut (uneven): worn or bent blade, uneven wheel height settings, buildup under the mower housing
• Excessive vibration: loose blade hardware, bent blade, broken blade adapter, bent engine crankshaft
• Hard to push or loss of drive: worn drive belt, worn drive pawls, transaxle wear, belt guide issues

1. Confirm the control bar is fully depressed to the handle during starting.
2. Drain and refill with fresh gasoline if fuel is older than about 30 days.
3. Inspect under the deck (engine off, spark plug wire disconnected) and remove packed grass.
4. Check the blade for damage and tightness; replace if bent or badly worn.
5. Look for drive belt wear (glazing, cracking, stretching) if the mower slows or won’t self-propel.

These problems are more than convenience issues. A loose or damaged blade can cause strong vibration and additional damage, and heavy deck buildup can reduce airflow and cutting performance, making the engine work harder than it should.

Last updated: February 2026

The model number is 917.370931 (often written without the dot as 917370931) for this Craftsman rotary lawn mower. You can confirm it on the model tag and in the 917370931 owner's manual, where it appears on the cover page.

We recommend checking these common locations on Craftsman walk-behind mowers:

• On the rear of the deck near the discharge opening
• On the top of the deck near the engine mounting area
• Near the handle mounting brackets
• On a label or stamped plate on the mower housing
• In the paperwork that came with the mower (manual and parts list)

Both formats refer to the same mower; the dot is just a formatting style used in some manuals and parts diagrams.

Using the exact model number helps us match the correct Craftsman walk-behind mower parts (blade, drive belt, control cable, wheels) and avoid fit issues.

If you are ordering common wear items for this model, match the part to the diagram in the manual first. For example, the blade listed for this mower is the husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825.

Last updated: February 2026

Craftsman model 917.370931 is identified in the owner’s manual as a 22-inch, power-propelled rotary mower with a Briggs & Stratton 725 Series engine and electric start; the manual itself does not list a specific first and last production year. For the exact build year, we use the mower’s product ID/serial information shown in the 917370931 owner’s manual.

We match the mower’s identification numbers to the manufacturing date range.

• Look for the model and serial/product ID label on the mower deck or rear housing area
• Write down the serial number exactly as shown (letters and numbers)
• If your mower has electric start, also note any battery or starter labeling
• Compare the identification info to the model identification section in the manual
• Use the parts list diagrams to confirm you are working with 917.370931 (not a close variant)

The manual confirms the configuration and key features for 917.370931, which helps ensure you are dating the correct mower.

Craftsman walk-behind mowers can share similar decks and handles across multiple years, but parts can change by production run. Confirming the build year helps us match the correct blade, drive components, and hardware (for example, the husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825) before you order.

Last updated: February 2026

On your Craftsman walk-behind mower, the model number is printed on the mower’s identification label; for this unit it appears as 917.370931 in the documentation. Use that mower model number (not the engine numbers) when ordering non-engine parts for model 917370931.

Look for a sticker or metal tag in these spots:

• On the rear of the mower deck (behind the engine)
• On the top of the deck near the engine mounting area
• Near the rear discharge door or bagging opening
• On the handle bracket area (left or right side)
• Under the deck lip near the wheel height adjuster

If the label is dirty or faded, wipe it with a damp rag and mild soap; avoid scraping so you do not remove the printing.

Use the mower model number for most parts like blades, belts, wheels, and cables. Engine labels often show separate numbers that do not match the mower parts list.

The model number ties directly to the correct illustrated parts list and hardware sizes. Using the wrong number can lead to ordering a blade, drive belt, or control cable that does not fit.

Once you confirm the model number, you can match common wear items such as the husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825 to the correct deck and adapter.

For diagrams and the exact model identification shown in the documentation, check the Craftsman 917370931 owner's manual.

Last updated: February 2026