Craftsman 917376632 lawn mower Parts

The Craftsman 917376632 is a walk-behind gas lawn mower model number, not a single fixed-price item. The total cost depends on whether you’re buying a complete mower (new or used) or ordering replacement parts for repairs; our parts pricing varies by component.

What you can price on this model page

If you’re repairing a Craftsman 917376632, you can price common replacement parts directly from the parts list for this model. Examples include:

• Lawn mower blade 532406713 (cutting performance and mulching)
• Lawn mower wheel and tire, 8 x 1.75-in 583719501 (drive and tracking)
• Poulan lawn mower ground drive belt, 3/8 x 33-3/16-in 532196857 (self-propel drive)
• Husqvarna lawn mower drive control cable 532197195 (engages the drive)
• Skirt 532413160 (rear deck shielding)

How to estimate your total repair cost

A quick way to estimate cost is to add the parts you need plus any supplies (oil, fuel stabilizer) and optional labor.

Repair goal	Parts you’ll commonly price	Typical outcome
Improve cut quality	Blade, fasteners as needed	Cleaner cut, less tearing
Fix self-propel not moving	Drive belt, drive cable, wheel/pinion parts	Restores drive engagement
Replace damaged wheel	Wheel and tire, dust cover, e-ring	Smoother rolling and traction

Why it matters

This mower’s model number (917.376632) identifies the correct diagrams, part numbers, and maintenance specs. Using the right model info prevents ordering the wrong blade, belt, or drive parts and helps keep the mower operating safely.

Specs and maintenance details to confirm

For model-specific maintenance intervals, adjustments, and safety steps, use the owner's manual. It also helps you confirm the correct configuration (22-inch multi-cut, power-propelled) before you order parts.

Last updated: February 2026

For Craftsman walk-behind mowers like model 917376632, the model number identifies the exact mower design and parts breakdown; it is not a date code. Use the model number to match the correct blade, drive belt, wheels, and other replacement parts, and confirm details in the 917376632 owner's manual.

Where to find the model number on your mower

Most Craftsman walk-behind mowers show the model number on a product label; common locations include:

• Rear of the mower deck (near the discharge opening)
• Top of the deck behind the engine
• On the handle support area near the height adjusters
• Near the rear door or bagging area

How to use the model number correctly

When you use 917376632, you can pull the right diagrams and parts list for your exact mower configuration.

• Match the full model number exactly (all digits)
• Use the parts diagrams to confirm the part description and placement
• Replace fasteners with the correct size and type (lock nuts, E-rings, washers)
• Follow the maintenance schedule and safety rules before servicing

Common parts this model number helps you match

Here are examples of parts that are model-specific and should be matched by model number:

Part type	Example for model 917376632	What it affects
Blade	Lawn mower blade 532406713	Cut quality, vibration
Ground drive belt	Ground drive belt 532196857	Self-propel movement
Drive wheel	Lawn mower wheel and tire 583719501	Traction, drive engagement

Why it matters

Using the correct model number prevents ordering the wrong Craftsman parts that look similar but fit differently (especially blades, drive components, and wheel hardware). It also ensures you follow the right service and adjustment procedures for your mower.

Last updated: February 2026

Common problems on the Craftsman 917376632 gas walk-behind mower include no-start conditions (stale fuel, dirty air filter, bad spark plug, disconnected plug wire), loss of power from grass buildup under the deck, uneven cutting from a worn or bent blade, and self-propel drive issues from belt or cable wear. See the owner's manual troubleshooting chart for model-specific checks.

Most common symptoms and what they usually mean

• Won’t start: stale fuel, dirty air filter, spark plug or plug wire issue, control bar not held to the handle
• Loss of power: cutting too much grass at once, grass and debris packed under the mower housing, dirty air filter
• Poor or uneven cut: worn/bent/loose blade, uneven wheel height settings, deck packed with clippings
• Excessive vibration: loose blade hardware, damaged blade, blade adapter issue, bent crankshaft
• Hard to push or drive slows: cutting height too low, grass catcher too full (if equipped), drive belt or drive cable wear

Quick troubleshooting checklist (in order)

• Drain old gas and refill with fresh, clean gasoline
• Clean or replace the air filter
• Check the spark plug wire connection; replace the spark plug if fouled
• Hold the control bar firmly against the handle while starting
• Tip the mower safely (spark plug wire disconnected) and clean packed grass from under the deck
• Verify all four wheels are set to the same cutting height

Parts that commonly solve these issues

If your symptoms point to wear items, these model-matched parts are common fixes:

Symptom	Likely wear item	Example part for this model
Uneven cut, poor cut quality	Blade	Lawn mower blade 532406713
Drive slows or won’t pull	Ground drive belt	Ground drive belt 532196857
Self-propel feels loose	Drive control cable	Drive control cable 532197195
Hard to roll, wheel wobble	Wheel and tire	Lawn mower wheel and tire, 8 x 1.75-in 583719501

Why it matters

Catching these problems early prevents bigger damage. For example, mowing with a bent blade increases vibration, which can loosen fasteners and stress the crankshaft; mowing with a packed deck forces the engine to work harder and can cause repeated stalling.

Last updated: February 2026

For the Craftsman walk-behind mower model 917376632, use unleaded regular gasoline; the owner’s manual lists a 1.6-quart fuel capacity and specifies “unleaded regular.” For best small-engine performance, use fresh fuel and avoid high-ethanol blends.

What to use (and what to avoid)

• Use fresh unleaded regular gasoline.
• Choose fuel with 10% ethanol or less (E10) when available.
• Avoid E15 and E85; these higher-ethanol fuels can cause hard starting, rough running, and fuel-system damage in small engines.
• Do not mix oil into the gas (this mower uses 4-cycle engine oil in the crankcase).
• Store gasoline in an approved container and keep it clean and dry.

Quick specs for model 917376632

Item	Spec (from manual)	Why it matters
Gas type	Unleaded regular	Prevents fuel-related starting and running issues
Fuel capacity	1.6 quarts	Helps you avoid overfilling and spills
Engine oil type	SAE 30 (above 32°F), SAE 5W-30 (below 32°F)	Correct viscosity protects the engine

Best practices for fewer fuel problems

• Buy only what you will use in 30 days.
• If the mower will sit, add fuel stabilizer and run the engine a few minutes to pull treated fuel into the carburetor.
• If you smell stale fuel or the mower surges, drain the tank and refill with fresh gas.

Why it matters

Fuel quality and ethanol content directly affect the carburetor, fuel lines, and starting reliability on a gas walk-behind mower. Using the correct unleaded regular fuel helps your Craftsman mower start easier and run smoother.

For the exact fuel and maintenance specifications for your mower, follow the owner's manual.

Last updated: February 2026