Owner’s manual
Are radial arm saws worth anything?
Yes. A Craftsman radial arm saw like model 11329410 is worth something when it is complete, runs smoothly, and can be tuned to cut accurately; these saws still excel at wide crosscuts and certain setups (like dado work). Most value comes from condition, included accessories, and safe, precise operation (not just age).
What affects value the most
- Overall condition: rust, missing guards, cracked castings, damaged table/fence
- Motor health: starts reliably, reaches speed, no burning smell, no excessive sparking
- Accuracy and adjustability: arm and yoke lock firmly, indexing feels positive, cuts stay square
- Completeness: blade guard, anti-kickback parts, fence/table hardware, knobs and clamps
- Local demand: radial arm saws are niche; pricing varies by region and pickup-only sales
Practical “worth it” uses (and what to avoid)
The 11329410 can be very useful when set up correctly. The 11329410 owner's manual emphasizes careful indexing and safe operation; that matters because a tuned saw is safer and produces better results.
Best uses
- Wide crosscuts where a miter saw capacity is limited
- Repetitive crosscuts with a stop block
- Dadoes and some joinery setups (with the right accessories and guarding)
Use extra caution
- Ripping operations; the manual includes cautions about rip scale use and proper setup
Quick condition check before you price it
| Check | What “good” looks like | What lowers value |
|---|---|---|
| Arm/yoke locks | Locks tight with minimal play | Slips, won’t hold settings |
| Carriage travel | Smooth, no binding | Rough travel, chatter |
| Blade alignment | Cuts square consistently | Persistent heel/out-of-square |
| Electrical | Cord/plug intact, switch works | Damaged wiring, intermittent power |
Why it matters
Radial arm saws can be excellent tools, but their real value is tied to safe setup and repeatable accuracy. A saw that locks solidly and indexes consistently is both more useful and easier to sell.
Finding parts and documentation
We recommend using the model-specific diagrams and part list first, then using Sears PartsDirect to search by model number if you are comparing options or looking for additional Craftsman power tool parts.
Last updated: February 2026
What are the common problems with radial arm saws?
Common radial arm saw problems on the Craftsman 11329410 (10 inch accra-arm radial saw) include cuts that are not square (blade “heels” left or right), rough or chattering elevation travel, wood smoking with the motor bogging down, and electrical no-start issues such as a blown fuse. For model-specific adjustment steps, use the owner's manual.
Common symptoms and what they usually mean
- Cuts not square or blade “heels”: the arm, yoke, or blade alignment is out of adjustment.
- Cannot rip properly: fence setup, blade condition, or alignment is off.
- Wood smokes and motor bogs: dull blade, feeding too fast, or binding from misalignment.
- Elevation crank feels rough or chatters: dirty or dry lift mechanism, worn hardware, or misadjustment.
- Motor hums but will not run: power supply issue, switch problem, or motor start circuit issue.
- Motor will not run (blown fuse): shorted wiring, failing switch, or motor fault.
Quick checks we recommend (safe, high-impact)
- Unplug the saw before any inspection or adjustment.
- Confirm the blade is sharp, clean, and installed correctly; a dull blade commonly causes smoking and bogging.
- Verify the arm and blade are square to the fence for accurate crosscuts.
- Check that the workpiece is supported and the fence is straight and secure.
- Inspect the power cord and plug for damage; look for pinched or cracked insulation.
- If a fuse or breaker trips, stop and inspect wiring and the switch before running again.
Troubleshooting guide (symptom to next step)
| Symptom | Most common cause | Best next step |
|---|---|---|
| Blade “heels” left/right | Alignment out of adjustment | Follow the manual’s blade heel and squaring procedure |
| Wood smokes, motor slows | Dull blade or binding | Replace/clean blade; re-check alignment |
| Elevation crank chatters | Lift mechanism friction/wear | Clean, lubricate, and inspect lift hardware |
| Motor hums, won’t start | Electrical start issue | Check supply, switch, and motor circuit |
| Fuse blows / won’t run | Short or overload | Inspect cord, switch, and wiring before reuse |
Why it matters
Most radial arm saw complaints trace back to alignment and blade condition. Keeping the Craftsman 11329410 square and the blade sharp improves cut accuracy, reduces kickback risk, and prevents motor overload.
For replacement parts and diagrams for this model, start with the parts list for the Craftsman 11329410; you can also search by model number on Sears PartsDirect.
Last updated: February 2026
When did Craftsman stop making radial arm saws?
Craftsman radial arm saw production largely ended in the mid-1990s; most owners date the end of the main Craftsman radial arm saw era to around 1995. For your Craftsman 11329410 10-inch accra-arm radial saw, our owner's manual helps you identify the exact model and the correct repair parts list.
What we can say for the Craftsman 11329410
This model is a classic 10-inch accra-arm radial saw design with service information focused on setup, adjustments, and parts identification.
- The manual includes a parts list and ordering guidance using the model number 113.29410 and the part number.
- It also covers common operations (crosscutting, ripping, routing, sanding) and troubleshooting.
- For repairs, matching the exact model number is the key step before ordering parts.
How to date your saw more accurately
Because “Craftsman” spans many years and factories, the most reliable way to narrow the build period is to use the identification information on the tool and compare it to documentation.
- Check the model tag for the full model number and any serial/date code
- Confirm the exact model format (for example, 113.29410 vs. similar 113.xxxxx models)
- Compare your saw’s features (guard style, table design, switch style) to the diagrams in the manual
- Use the parts list to confirm you are looking at the correct revision
Quick timeline (practical guidance)
| What you’re trying to determine | Best clue to use | What it tells you |
|---|---|---|
| “Is it from the main Craftsman radial arm saw era?” | Model family and design style | Most are from the 1960s through mid-1990s |
| “Is it likely pre-1995?” | 113-prefix Craftsman saws are commonly older designs | Strong indicator it is from the earlier era |
| “What parts should I order?” | Exact model number and parts list | Prevents wrong-fit parts |
Why it matters
Knowing the approximate production era helps you set expectations for parts availability and safe setup. With older radial arm saws, correct blade installation, alignment, and guarding are especially important for accurate cuts and safe operation.
Ordering parts
When you are ready to shop, use the model number 11329410 to search and match parts; we also make it easy to search by model on Sears PartsDirect.
Last updated: February 2026