Kenmore Pro Warming drawer Parts — Browse All Models

Troubleshooting your Kenmore Pro warming drawer when it won't power up

• Check the house circuit breaker for the warming drawer to see if the breaker tripped. Reset the house circuit breaker to restore power to the warming drawer if you find that the breaker tripped. If the breaker trips again as soon as you use the warming drawer, then you'll need to have a service technician examine and repair the warming drawer because the appliance has a short circuit in its wiring or a component that's causing the breaker to trip.
• If the breaker isn't tripped, shut off the breaker to disconnect electrical power to the warming drawer and check the power supply wiring connections. Reconnect any loose wiring connections and repair any broken wires.
• If power supply wiring connections are okay, check the wiring connections on the control. Reconnect any loose wires and repair any broken wires.
• If control wiring connections are okay, then you may need to replace control components to fix the warming drawer.

Common Kenmore Pro warming drawer replacement parts

• Control knob. The control knob allows you to set the warming drawer temperature.
• On/off switch. The on/off switch turns the warming drawer on and off.
• Signal light. The signal light glows when the on/off switch is turned on.
• Drawer handle. The drawer handle allows you to open and close the warming drawer.