Haier Dvd player Parts — Browse All Models

Care and handling tips for discs used in your Haier DVD player

• Handle DVD and CD discs by the outer edge or the center hole. Don't touch the media surface of the discs.
• Keep dirt, liquids and other foreign matter away from discs. Remove any dirt, fingerprints, smudges, liquids or other foreign material from the discs by wiping discs with a clean cotton fabric in a straight line from the center of the disc to the outer disc edge. Use DVD/CD cleaning detergent, isopropyl alcohol or methanol to clean stubborn dirt or deposits from discs.
• Store DVD and CD discs upright. Don't bend discs. Don't expose discs to extreme heat or high humidity.
• Don't use adhesive labels to mark DVD or CD discs. Use a non-solvent-based felt-tip marker to label the top side of the disc.

Troubleshooting your Haier DVD player when it won't power up

• If you're using the remote control to attempt to power up the DVD player, try using the power button on the DVD player.
• If the DVD player won't power up when you press the power button on the player, check the power cord. Plug the DVD player power cord securely into the electrical wall outlet if the outlet cord plug is loose.
• If the DVD player power cord is properly plugged into the electrical wall outlet, check the electrical outlet for power by plugging a different item into the wall outlet. If the wall outlet is dead, reset the house circuit breaker for the wall outlet. Have an electrician repair the wall outlet if it remains dead after resetting the house circuit breaker.
• If you have the DVD player plugged into a surge protector, check for a tripped circuit breaker on the surge protector. Reset the surge protector circuit breaker if it's tripped.
• If the DVD player is getting power through the power cord but won't power up, you may need to replace the power control board in the DVD player.