Haier Washer/dryer combo Parts — Browse All Models

Troubleshooting your Haier washer/dryer combo when the washer won't fill

If your washer doesn't fill with water, first check that the house water supply to the washer/dryer combo is on. If it is, and the washer won't fill at all, the inlet valves might have failed. If the washer fills partially, the problem is likely with the temperature selector switch or water-level pressure switch. If the washer agitates without filling, then the pressure switch is likely broken because it's detecting the full tub of water when the tub is empty.

Other components that control your washer filling with water include the main electronic control board, the door lock assembly and the door switch. Unplug the washer/dryer combo and check the wiring connections between the electronic control board and washer components in the fill circuit. Reconnect any loose wires and repair any broken wires. Repairing loose or broken wiring may fix the filling failure.

Common Haier washer/dryer combo replacement parts

• Heating element. The heating element provides the heat needed in the drying cycle.
• Fill valve assembly. The fill valve assembly controls water flow into the washer/dryer combo for the wash cycle.
• Electronic control board. The electronic control board controls the washer and dryer functions such as filling, agitating, draining and drying.
• Drain pump. The drain pump removes water from the washer/dryer combo at the end of the wash cycle.