Jenn-Air Upright freezer Parts — Browse All Models

Finding out why the walls of your JennAir upright freezer are hot

It's normal for the outer walls of the freezer to get warm or hot when the compressor is running; refrigerant lines inside the cabinet walls remove heat from the compressed refrigerant. The hot refrigerant helps control cabinet humidity to prevent the cabinet from sweating.

If the walls get extremely hot, the condenser fan could be malfunctioning. The condenser fan blows air across the condenser coils to help cool the compressed refrigerant before it enters the evaporator. Replace the condenser fan if it doesn't run when activated.

Dirty condenser coils can also cause the hot freezer walls. Dust build-up on condenser coils interferes with heat transfer so the refrigerant stays hotter as it leaves the condenser and travels through lines in the freezer walls.

Performing routine maintenance on the freezer can also help keep the freezer walls from getting hot. Cleaning dust from the compressor compartment grill can improve airflow across the condenser so the refrigerant is cooler as it goes through lines in the freezer walls. Replacing the door gasket can prevent air from leaking into the freezer compartment, causing the compressor to run longer and heating up the refrigerant travelling through lines in the freezer wall.

Top replacement parts for JennAir upright freezers

• High-temperature alarm switch. The high-temperature alarm switch turns the power to the temperature alarm on or off as desired.
• Freezer baskets. Freezer baskets make it easier to organize food in the freezer.
• Compressor. The compressor is a positive displacement pump that compresses the refrigerant in the sealed system of a freezer.
• Compressor start relay. The compressor start relay attaches to the compressor and helps start the compressor motor.
• Door switch. The door switch detects whether the freezer door is open or shut and turns on the light when you open the door.