Thermador Wine & beverage cooler Parts — Browse All Models

Reversing the door swing on your Thermador wine or beverage cooler

• Unplug the wine or beverage cooler power cord to disconnect electrical power.
• Remove the toe grill mounting screws and pull the toe grill off the wine or beverage cooler.
• Remove the upper hinge bracket cover.
• Remove the upper hinge bracket mounting screws. Support the door while removing the last mounting screw to keep from bending the door hinge pin at the bottom of the cabinet. Remove the upper hinge bracket while still supporting the door.
• Carefully lift the door off the hinge pin at the bottom of the cabinet and place the door on a padded surface.
• Move the hinge pin to the opposite side of the wine or beverage cooler cabinet.
• Install the door on the hinge pin and support the door while installing the upper hinge bracket with its pin inserted in the top of the door. Reinstall the upper hinge bracket cover.
• Plug the power cord back into the wall outlet to restore power to the wine or beverage cooler.

Top-selling replacement parts for Thermador wine and beverage coolers

• Door seal. The door seal prevents warm air from entering the wine or beverage cooler cabinet when the door is shut. Replace the door seal if it's loose or damaged.
• Circulation fan. The circulation fan blows air through the wine or beverage cooler cabinet to cool beverages efficiently. Replace the circulation fan if it doesn't run when it gets current from the control board.
• Door handle. The door handle allows you to open the wine or beverage cooler door easily. Replace the door handle if it's damaged or broken.
• LED assembly. The LED assembly lights the interior of the wine or beverage cooler when you open the door. Replace the LED assembly if it doesn't light up when it gets electrical current.