Sunbeam Electric range Parts — Browse All Models

Top replacement parts for Sunbeam electric ranges

• Electronic oven control board. The electronic oven control (EOC) board governs the timing and execution of oven functions in the range. It's usually attached to the control panel and often has a digital display clock mounted on the front of its housing.
• Oven door lock assembly. The oven door lock assembly is a safety mechanism that prevents accidental burns and oven fires by latching the door shut during self-cleaning. The door unlocks when the oven cools to a safe temperature (usually less than 200 degrees F). It's also used on ovens with the child lock-out feature. The assembly includes the lock and switches that detect whether the door is locked.
• Oven temperature sensor probe. The oven temperature sensor probe is at the top of the back of the oven and detects the temperature inside the oven. Temperature is measured by the change in resistance in this sensor, which is why the sensor is also referred to as an Resistance Temperature Detector (RTD). A wire harness connects the oven temperature sensor probe to the electronic control board so the sensor can communicate the oven temperature to the control board.
• Radiant surface element. The radiant surface element is mounted on the bottom of a ceramic glass cooktop and provides heat for that area of the cooktop. It's controlled by a surface element switch (also called a surface burner switch or infinite burner switch). The radiant surface element has a limit switch that shuts off the element to protect the ceramic glass cooktop from overheating.
• Surface element switch. The surface element switch (also called a surface burner switch or infinite burner switch) is mounted on the control panel of an electric range or cooktop. It's an electrical switch that turns on and off the associated surface element and also controls the how much heat the element produces.

What to do when the coil surface element on your Sunbeam electric range isn't heating properly

A break or flaw in a heating coil can prevent the surface element from heating properly. If a portion of the element doesn't heat, replace the surface element.

Coil surface elements plug into a terminal block to get power. The element won't heat if the terminal block fails. You'll likely see the terminal block body melted when it fails. Check the terminal block and replace it if it's melted or damaged.

A faulty control switch can also cause surface element heating problems. If a surface element heats evenly but you can't control the temperature using the surface element switch, replace the surface element switch.