Muskin Central vacuum Parts — Browse All Models

How to fix a brush roll that isn't spinning on your Muskin central vacuum system attachment

A broken drive belt, damaged brush roll, jammed brush roll bearings, tripped brush roll motor overload, failed brush roll motor or a wiring failure in the wand or nozzle can prevent the brush roll from spinning.

Check the condition of the drive belt and replace the belt if it's worn or broken. If the drive belt is okay, but the brush roll won't spin, check the bearings on the sides of the brush roll for debris such as hair that may be tangled in the bearings and preventing the brush roll from turning. Remove hair and other debris that you find in the bearings. Check the brush roll for damage and replace if it's damaged or broken.

Muskin central vacuum common replacement parts

• Brush roll. The brush roll attaches to the bottom of the power nozzle and agitates the carpet to loosen dirt and dust that gets vacuumed into the collection canister.
• Brush roll belt. The brush roll belt connects the motor to the brush roll to spin the brush roll and agitate dust and dirt out of the carpet.
• Brush roll motor overload. The brush roll motor overload switch trips if the brush roll motor overheats.
• Power cord. The power cord provides the central vacuum system with electrical current to operate.