Official Panasonic canister vacuum parts

Replacing the dust bag in your Panasonic canister vacuum cleaner

• Unplug the vacuum cleaner power cord from the electrical outlet.
• Remove the suction hose from the canister.
• Pull the canister hood release up and out. Lift the canister hood.
• Disengage the cardboard tab from the bag mount by pulling the tab out while lifting up on the tab.
• Pull the bag out of the canister.
• Install the new bag's cardboard tab into the bag mount and tuck the new dust bag into the canister.
• Close the canister hood and reinstall the suction hose on the canister.

Top-selling parts for Panasonic canister vacuum cleaners

• HEPA filter. The HEPA filter traps dust, pet dander and pollen from exhaust air in the vacuum cleaner.
• Vacuum dust bag. The vacuum dust bag collects the dust and dirt that the vacuum cleaner sucks up.
• Brush roll drive belt. The brush roll drive belt transfers motion between the drive motor pulley and the brush roll.
• Dirt sensor control board. The dirt sensor control board receives signals from the dirt sensor and sends signals to the dirt sensor display to show the amount of dirt being picked up by the vacuum.