Can’t find your part?   Contact us:+1-309-603-4777
Sears Parts Direct
Tips to find your model number
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
Musgrave Routers

Official Musgrave router parts

Musgrave routers provide a smooth, well-balanced run through any routing cut. Variable speed controls allow you to adjust the router for any type of cut. Musgrave routers are built to last but parts can eventually wear out. When you need parts for your Musgrave router, you'll find them at Sears PartsDirect.

Showing 1-1 of 1
Musgrave DW6707 router base
32 parts
Showing 1-1 of 1
Back to top

Safety tips for your Musgrave router

  • Hold the router by insulated gripping surfaces when using the router on surfaces where the cutting bit may contact hidden wiring.
  • Keep the router power cord out of the way when cutting work pieces.
  • When cutting metal, clean shavings and debris out of the router often. Metal dust and chips can build up on interior router surfaces and cause serious injury.
  • Insert the router into the router base before running the motor.
  • Keep router handles dry, clean and free from oil and grease to you can safely control the router using the handles.
  • Change cutting bits often. Don't use dull cutting bits.

Troubleshooting your Musgrave router when it won't power up

Check the electrical outlet to make sure it has power. If the electrical outlet is dead, reset the house circuit breaker for the outlet or use a different electrical outlet.

Check the power cord. Replace the power cord if it's frayed or cut.

Unplug the router and check the wiring. Reconnect any loose wires and repair any broken wires.

Check the power switch. Use a multimeter to measure continuity through the switch. If the meter measures not continuity through the switch with the switch in the on positions, replace the power switch.

Check the motor brushes. The motor won't run if the carbon motor brushes are worn down. Replace the carbon motor brushes if the brushes are worn down past their limit mark.

Parts & More