Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
Broan Trash compactors

Official Broan trash compactor parts

Broan trash compactors keep your kitchen garbage out of sight and out of mind. Broan trash compactors use dependable motors and sturdy rams to compact kitchen garbage and store it for disposal. When your Broan trash compactor doesn't run right, get the replacement parts you need to fix the problem from Sears PartsDirect.

Top replacement parts for Broan trash compactors

  • Drive chain. The drive motor rotates the chain, which moves the ram up and down to compact the trash inside the drawer.
  • Drawer tilt switch. The drawer tilt switch monitors the drawer position and stops or reverses the motor if the ram binds and tilts the drawer during compacting.
  • Drawer. The drawer slides in and out of the front of the compactor, and contains the trash under the ram for compacting.
  • Motor centrifugal switch. The motor centrifugal switch reverses the direction in which the motor rotates to change between upward and downward motion.

Troubleshooting your Broan trash compactor when it won't start

Lack of power, a failed drawer safety switch, bad power switch, faulty momentary start switch, failed top limit and directional switch, bad motor centrifugal switch, failed drive motor or a wiring failure will prevent the trash compactor from starting.

Check the electrical power supply for the compactor first. Check the house circuit breaker for the trash compactor's outlet and reset the circuit breaker if it's tripped.

If the breaker isn't tripped, pull the trash compactor out of the cabinet and plug a small lamp or appliance into the trash compactor's electrical outlet to check for power. If the electrical outlet is dead, have an electrician repair the outlet.

If the outlet has power, check the condition of the power cord and replace it if it's damaged.

If the power cord is okay, use a multimeter to check for continuity through the power switch with the power switch turned on. Replace the power switch if the meter measures infinite resistance through the power switch with the switch turned on.

If the power switch is okay, check for continuity through the momentary start switch with the switch plunger extended outward. The momentary start switch sends current to the motor when you close the drawer and the foot pedal assembly releases the lever that holds the plunger. Replace the momentary start switch if the switch measures infinite resistance.

Parts & More