MTD Snowblower Chute Control Wire Harness 925-06248

Basic Information

• Part Name: Chute Control Wire Harness
• Manufacturer: MTD
• Category: Snowblower
• Primary Function: Connects the chute control to the snowblower s electrical circuits

Installation & Compatibility

• Compatible Models: Fits various MTD snowblower models. Please confirm this part is correct for your model before ordering.
• Installation Difficulty: Medium; requires careful handling and some experience with electrical connections
• Tools Required: Screwdriver, work gloves

Additional Information

The MTD snowblower chute control wire harness (part number 925-06248) sends power between the chute control lever and the motorized chute components so you can change the snow discharge direction during operation. A damaged or worn wire harness can cause symptoms like the chute not turning, moving only in one direction, or moving intermittently.

Replace the chute control wire harness if you notice loose, frayed, or broken wiring that prevents consistent chute movement. This genuine MTD part is designed for reliable operation in cold, snowy conditions.

To install, power off the snowblower and wear work gloves to protect your hands from sharp edges. Disconnect the old harness from the control lever and motor connections, then secure the new harness in the same routing path. Make sure all connectors are firmly attached before operating the snowblower again.