$98.80 |
9% OFF Phone Price : $108.80
CONFIRM THE PART FITS
Part Information
This element (part number WB30T10093) is for cooktops.
Element WB30T10093 supplies the heat to a cooking area on the cooktop.
Unplug the cooktop before installing this part.
Frequently Used Together
- $99.56 |9% OFF Phone Price : $109.56
- $50.11 |9% OFF Phone Price : $55.11
- $70.83 |7% OFF Phone Price : $75.83
- $77.37 |6% OFF Phone Price : $82.37
- $51.24 |9% OFF Phone Price : $56.24
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #JP930BA1BB GE electric cooktop | JP930BA1BB | Cooktop |
| Model #JP930AA1AA GE electric cooktop | JP930AA1AA | Cooktop |
| Model #JP930WA1WW GE electric cooktop | JP930WA1WW | Cooktop |
| Model #JP930SA1SS GE electric cooktop | JP930SA1SS | Cooktop |
| Model #JP989KD5CC GE electric cooktop | JP989KD5CC | Control panel & cooktop |
| Model #JP989BK1BB GE electric cooktop | JP989BK1BB | Cooktop |
| Model #JP989BD5BB GE electric cooktop | JP989BD5BB | Control panel & cooktop |
| Model #PP989TN2WW GE electric cooktop | PP989TN2WW | Control panel & cooktop |
| Model #PP989SN2SS GE electric cooktop | PP989SN2SS | Control panel & cooktop |
| Model #JP989SD4SS GE electric cooktop | JP989SD4SS | Control panel & cooktop |
Reviews
Straight forward replacement.
Easy to install once I had the downdraft pipes disconnected on my particular cooktop. Lift the cooktop out. Remove knobs and the 12 screws holding the glass top down. Lift the glass off and the element just sits there. Disconnect/reconnect 9 wires. Be sure to order new insulating tape and foam tape. You will need to replace the old tape for sure. Then reinstall the glass and set the unit back in the counter. Takes a couple of hours max. You need a1/4" nut driver and putty knife(to loosen the top from the old foam tape). A flathead screwdriver can help you loosen the wire connectors. I used rubbing alcohol and a rag to clean off the old tape residue. If yours is a downdraft like mine you will need to disconnect on joint on the exhaust and then have tape to re-tape it on install. Its not a hard repair. Good luck.
ETCS(SS), Twin City, GA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend