CONFIRM THE PART FITS
Vacuum Floor Nozzle Base Plate KC77RDWCZV06
Part #KC77RDWCZV06
Part Information
This floor nozzle base plate (part number KC77RDWCZV06) is for vacuums.
Floor nozzle base plate KC77RDWCZV06 is the bottom section of the floor nozzle and houses the internal components of the floor nozzle.
Unplug the vacuum before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $15.37 |12% OFF Phone Price : $17.37
- $27.38 |15% OFF Phone Price : $32.38
- $20.68 |19% OFF Phone Price : $25.68
- $15.95 |11% OFF Phone Price : $17.95
- $27.38 |15% OFF Phone Price : $32.38
- $17.49 |10% OFF Phone Price : $19.49
- $28.63 |15% OFF Phone Price : $33.63
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #12521814610 Kenmore canister vacuum | 12521814610 | Floor brush |
Model #11621814410 Kenmore Elite canister vacuum | 11621814410 | Floor brush |
Model #12521814610 Kenmore Elite canister vacuum | 12521814610 | Floor brush |
Model #11621814411 Kenmore Elite canister vacuum | 11621814411 | Floor brush |
Reviews
vacuum base plate
Part was an exact fit .Part came early than expected.will use partsdirect again
Paugus Bay, Massachusetts
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Just right
Not bad to install, took about 1 hour, only beacuse there are so many parts to plug back in off the old one
Puddus, Edgewood, NM
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Relatively easy to install
Didn't take long to replace, but surprising that this was the second time I had to replace this part in the l last two ye as rd
DavidRva, Richmond
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Brush
I had to replace the under part of the floor nozzle because the little brushes were all worn out. Using it on an "uneven" slate tiles floor will do that quickly I learned! So you have to replace the whole base. Would be nice if you only could snap out the little brushes and replace them. Anyhow, when you finally unscrew the base (6 screws) you realize that there is quite some wires there for the dirt sensor. Many more screws. Take a photo of the layout of the old one before you unscrew everything and be patient not to bend contacts or snap wires. But it worked!
John, Palmdale, CA
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
It was the original equipment part and fit perfect
Took about 20 minutes to remove and replace all the electrical connections and hardware
None, Redmond Washington
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Part as shown online..
Wasn't too difficult to install, but pictures, an instruction link would have been helpful.
GLH123, Flor
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install
Very easy and quickly to install and it works very well
nmorais77, Kissimmee, FL
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Good experience
Exact part that fit perfectly. Quick on time delivery. Easy to install.
Billy O, Atlanta
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend