$19.49 |
49% OFF MSRP : $38.00
CONFIRM THE PART FITS
Part Information
This door boot (part number W11106747) is for washers.
Door boot W11106747 forms a seal between the wash tub and the door, preventing leaks.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $20.79 |42% OFF MSRP : $36.00
- $41.60 |34% OFF MSRP : $63.00
- $82.32 |25% OFF MSRP : $110.00
- $20.99 |30% OFF MSRP : $30.00
- $22.99 |18% OFF Phone Price : $27.99
- $13.04 |41% OFF MSRP : $22.00
- $71.58 |7% OFF Phone Price : $76.58
- $92.26 |23% OFF MSRP : $120.00
- $67.79 |7% OFF Phone Price : $72.79
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #WFW61HEBW1 Whirlpool washer | WFW61HEBW1 | Tub and basket parts |
| Model #7MWFW86HEBC0 Whirlpool washer | 7MWFW86HEBC0 | Tub and basket parts |
| Model #MHW4300DC0 Maytag washer | MHW4300DC0 | Tub and basket parts |
| Model #WFW86HEBW0 Whirlpool washer | WFW86HEBW0 | Tub and basket parts |
| Model #MHW3000BG0 Maytag washer | MHW3000BG0 | Tub and basket parts |
| Model #WFW94HEXR1 Whirlpool washer | WFW94HEXR1 | Tub and basket parts |
| Model #MHW6000XW1 Maytag washer | MHW6000XW1 | Tub and basket parts |
| Model #WFW90HEFW1 Whirlpool washer | WFW90HEFW1 | Tub and basket parts |
| Model #WFW87HEDW1 Whirlpool washer | WFW87HEDW1 | Tub and basket parts |
| Model #MHW6000AW2 Maytag washer | MHW6000AW2 | Tub and basket parts |
Reviews
VERY SATISFIED
THE ENTIRE PROCESS WAS VERY EASY. I WAS ABLE TO LOOK UP THE PART AND ORDER IT THROUGH SEARS PARTSDIRECT. IT SHIPPED WITHIN A FEW DAYS WITH STANDARD SHIPPING. PART ARRIVED AS PROMISED. IDENTICAL TO THE ORIGINAL PART. FOR CONVENIENCE I TOOK OFF THE FRONT OF AMANA FRONT LOAD WASHER. PART INSTALLATION WASN'T TOO BAD. THE MOST DIFFICULT PART WAS INSTALLING THE OUTER METAL RING WHICH SECURES THE GASKET TO THE FRONT PANEL. MY SUGGESTION IS TO PUT SMALL AMOUNT OF LUBRICANT LIKE DISH WASHER LIQUID ON THE METAL RING, WALK IT AROUN THE GASKET. HAVE SOMEONE SECURE ONE SIDE WITH THE TIP OF A BLUNT NOSE TOOL WHILE WAKING THE OTHER SIDE AROUND THE GASKET. THE OLD GASKET WAS CHANGED BECAUSE OF MOLD ISSUE. AFTER REPLACEMENT WITH THE NEW GASKET I PUT THE OLD GASKET IN DILUTED BLEACH AND THE MOLD WAS EASILY WASHED OFF. I WILL SAVE THE OLD GASKET FOR FUTURE USE, IF NEEDED.
FLORIDAMP, LADY LAKE, FLORIDA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Just follow steps
Not a hard job, just watch the video. The outer metal retainer installation was the hardest part and I didn't see it covered in the video but just use some pliers to stretch the spring
Jimmy P, Missoula, MT
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
not impressed for the overpriced 'original' part
the rubber looks defective on several portions of the inside of the gasket. appears that during the molding process the two sides stuck together, than were pealed apart during cooling, leaving the creases severely weakened in many places.
Nezi, West Chester, PA
3 people thought this review was helpful.
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Good product
Product was easy to install. Found a cheaper product on a different website, but it was of poor quality.
NACC, Undisclosed
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Installation.
Be patient. This is not the best design as far as installation.
Kim110, Brunswick, GA
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Washer door boot
Two hours to install. Additional time to clean internally
smaag, Undisclosed
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Boot for front load washer
Good heavy duty product. Much easier to remove than install. Drum side went on easy. Needed 4 extra hands to put on door side.
Bobstradamus, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
It was very easy to install
It was easy to install, took about an hour, and I didn't need to two sets of snap ring pliers
Bcupac53, San Diego, California
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour