CONFIRM THE PART FITS
Part Information
This bake igniter (part number 7432P143-60) is for ranges.
Bake igniter 7432P143-60 ignites the gas to light the bake burner.
Shut off the house circuit breaker and gas supply before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $178.93 |6% OFF Phone Price : $190.93
- $68.62 |8% OFF Phone Price : $74.62
- $3.40 |23% OFF Phone Price : $4.40
- $213.59 |5% OFF Phone Price : $225.59
- $90.48 |6% OFF Phone Price : $96.48
- $204.25 |6% OFF Phone Price : $216.25
- $131.49 |8% OFF Phone Price : $143.49
- $52.76
- $141.49 |8% OFF Phone Price : $153.49
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #MGT8800FZ05 Maytag gas range | MGT8800FZ05 | Manifold parts |
Model #MGT8800FZ00 Maytag gas range | MGT8800FZ00 | Manifold parts |
Model #WGG745S0FH02 Whirlpool gas range | WGG745S0FH02 | Manifold parts |
Model #MGT8820DS02 Maytag gas range | MGT8820DS02 | Manifold parts |
Model #MGT8820DS05 Maytag gas range | MGT8820DS05 | Manifold parts |
Model #MGT8820DS00 Maytag gas range | MGT8820DS00 | Manifold parts |
Model #MGT8820DS06 Maytag gas range | MGT8820DS06 | Manifold parts |
Model #MGT8820DS03 Maytag gas range | MGT8820DS03 | Manifold parts |
Model #WGG745S0FS02 Whirlpool gas range | WGG745S0FS02 | Manifold parts |
Model #WGG745S0FE02 Whirlpool gas range | WGG745S0FE02 | Manifold parts |
Reviews
1st one died, 2nd one works fine so far
Like title says, got first on installed (it was a pain as like other say have to pull entire unit out to access from back) but then the igniter broke after 1st use. Called up and was pleasantly surprised I didn't have to argue to get a replacement. The guy on phone said they'd send one immediately (which was good as it was almost Christmas and needed it for the roast). Got 2nd one installed and have used a handful of times with no issues. Find instruction videos on YouTube and it should take about an hour or so and just need a screwdriver and be able to power unit off at breaker.
ndog, Atlanta, GA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Worked great!
Great fit, seemed stronger than the original part. Fast delivery
J R H, Pottstown, PA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Not to bad to install for a first timer.
It was some what easy to install. It was my first so it might just be me. Some instructions would have been helpful. I got it in and working and that's all that matters.
I d k, Alabaster AL
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Easy fix and worth the time and expense.
I thought the part was exactly what I needed. I had to replace the connector with the original, but otherwise worked great.
Maxine F, Raleigh, NC
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Saved us a service call
It was not easy for our model. My husband is gas and electric savvy, but if you are not I would call a repair service. With our model you had to pull out the stove, remove the back of the stove after shutting off gas at the wall and turning off breakers. Our plug in pig tail was not short like the video but rather had to be fed through to the back and hooked up to the plug there. It wasn't that hard if you are savvy... if not ... call a professional is my advice for safety reasons.
Tessi, Idaho
1 person thought this review was helpful.
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Would have been easy but...
Removing igniter was a pain since connector was not accessible from inside oven. Had to move oven, remove back panel, id correct wire, pull out old igniter connector. Install required fishing New igniter connector through narrow hole with insulation. After that not a problem.
Allthumbs, Idaho
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
exact part needed
It took about an hour to install and was exact part replacing what was necessary
Jimhandymanmich, Michigan
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Oven parts
Ordered and installed a new burner and igniter in my gas oven.
JNNN, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes