CONFIRM THE PART FITS
Dryer Blower Wheel 31001317
Part #31001317
Part Information
This blower wheel (part number W11497304) is for dryers.
Blower wheel W11497304 attaches to the drive motor shaft and blows air through the drum and out through the exhaust vent
Disconnect the power before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $214.55 |Â14% OFFÂ MSRP : $250.00
- $12.71 |Â15% OFFÂ MSRP : $14.94
- $20.07 |Â20% OFFÂ Phone Price : $25.07
- $12.27 |Â44% OFFÂ MSRP : $22.00
- $50.82 |Â9% OFFÂ Phone Price : $55.82
- $8.40 |Â11% OFFÂ Phone Price : $9.40
- $23.18 |Â51% OFFÂ MSRP : $47.00
- $11.68 |Â29% OFFÂ MSRP : $16.47
- $42.72 |Â36% OFFÂ MSRP : $67.00
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #MCE8000AZQ Maytag dryer | MCE8000AZQ | Base, motor & blower |
Model #MCG8000AWW Maytag dryer | MCG8000AWW | Base, motor & blower |
Model #MCE8000AYW Maytag dryer | MCE8000AYW | Base, motor & blower |
Model #MCG8000AWQ Maytag dryer | MCG8000AWQ | Base, motor & blower |
Model #MCE8000AZW Maytag dryer | MCE8000AZW | Base, motor & blower |
Model #ADE7000AYW Admiral dryer | ADE7000AYW | Motor & drive |
Model #PYE4500AYQ Maytag dryer | PYE4500AYQ | Motor & drive |
Model #ADE9000AYW Admiral dryer | ADE9000AYW | Motor & drive |
Model #HYE3658AZW Maytag dryer | HYE3658AZW | Motor & drive |
Model #PYET444AZW Maytag dryer | PYET444AZW | Motor & drive |
Reviews
accurate dimensions and easily installed
Unplug the dryer, remove the front face and pivot out of the way, remove the blower cover, pull the retaining clip, slide faulty part off and re-install new part in reverse order.
TAS61, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Very easy tio install myself.
It only to me about 15 minutes tio install, and get her drying again.
He-Man, Wilmington, DE
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Dryer blower wheel
Hole diameter for the blower wheel was too small. I had to file it to the proper size to get it to fit on the motor shaft. A 10 minute job took over an hour. Very disappointed.
Charles05, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
part did not fit
This was not the first time I replaced this part. This part fit on the shaft but rubbed against the inside of the housing. Once you put the part on, you cannot get it off without breaking it. So the drier became unusable because the motor kept seizing up. I decided that my time was better spent on other things and bought a new dryer.
Troy52, Ashburn, VA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Easy repair
Person has pets and blower housing was packed with dog hair, needs to clean filter often.
Uncle L, Ohio
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
The part was easy to install and only took a few minutes
Sookie, Tennessee
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- Less than 30 minutes
Wrong size hole
This was the part the website said I would need for my Crosley dryer but found the hole for the motor shank was too small. Rather than return the part I filed it open for about 15 minutes or so and was able to make it fit. Seems fine so far.
Gary58, Green Lane, PA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour