CONFIRM THE PART FITS
Dethatcher Spring Tine MDL8.288.004
Part #MDL8.288.004
Part Information
This spring tine (part number MDL8.288.004) is for dethatchers.
Spring tine MDL8.288.004 attaches to the spring alignment rod and pulls dead grass and roots to the surface.
Wear work gloves to protect your hands when installing this part.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #48629280 Craftsman power rake | 48629280 | Reel axle/motor/wheels |
| Model #48629281 Craftsman power rake | 48629281 | Motor/axle/housing |
Reviews
Exact fit
Easy install. No issues on the parts and they were an exact fit
Nick91, Chicago
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy install
Took about 45 min to replace the springs and holder
Jjl26, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
thacher repair job
do not over-tighten the plastic tine holders when reinstalling assy. onto the drive shaft.. Do not try to reuse tines that are bent--it just makes the installation a lot more diff. to keep everything aligned. take your time
labrat, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour