CONFIRM THE PART FITS

Refrigerator Ice Maker and Auger Motor Assembly (replaces 4681JA1006K) EAU60943434

5 Stars
3
4 Stars
1
3 Stars
0
2 Stars
0
1 Stars
1

Part #EAU60943434

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

This part fits

Part Information

This ice maker and auger motor assembly (part number EAU60943434) is for refrigerators.

Ice maker and auger motor assembly EAU60943434 contains the complete ice maker and auger motor contained on a mounting bracket.

The ice maker and auger motor assembly mounting bracket has been redesigned. To install the new ice maker and auger motor, also order bracket part number MEG62543401. Remove the old assembly and install bracket MEG62543401 at the top of the door using the original upper screws. Slide the top of the new auger motor assembly into the bracket, then install the lower screws through the auger motor mounting bracket.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.

Reviews

Ice maker
June 27, 2022

This is the original equipment manufacturer part by LG. There is a slight modification in the design though. The original was attached with 5 Philips head screws. This one needs an adapter on the upper install with 2 screws and 2 screws to the lower end. No screws for the middle of the ice maker. It is so rewarding to see ice being dispensed once again on our 15 year old Kenmore Elite Fridge Freezer. I got the best price on Sears Parts Direct. Thank you.

Vadivelu S, Lexington MA

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Quick delivery!
January 30, 2022

It was easy to install and was delivered very quickly.

Donny, Allentown, PA

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

No so easy to install
July 03, 2018

Original part had 6 screws holding it in, this one only had holes for three. Room to make the electrical connections was VERY short, and almost impossible to connect. Packaging of part was VERY, VERY POOR, Knowing it was going to be shipped by UPS, who toss most boxes., No packing material whatsoever.

Experienced e t, East Tennessee

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour
Everything good came early
June 07, 2018

The part came without any instructions that was easy to do I've had it apart before but if you need instructions they weren't there no paper in the box at all.

Rod-, Utah

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour
Not install ready and drips water
April 09, 2018

First, not an identical match, then had to measure and drill mounting holes. Upper left mounting location not flat plastic, but elevated so that original screw is way to short, so I did not drill. Started working great, now drbbles water over ice tray and freezes around and in ice bucket.

Water dripping from tray and freezing around ice bucket and inside.
Water leaked and froze
Photo 2
Photo 1

Not t, Middletown, Va.

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour