$10.49 |
16% OFF Phone Price : $12.49
CONFIRM THE PART FITS
Part Information
This ignition switch (part number 532365402) is for lawn tractors.
Ignition switch 532365402 supplies current to the starter to start the engine.
Disconnect the spark plug wire before doing this repair. Wear work gloves to protect your hands.
Frequently Used Together
- $21.41 |19% OFF Phone Price : $26.41
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #8-36566 Murray front-engine lawn tractor | 8-36566 | |
| Model #46209X9A Murray gas walk-behind mower | 46209X9A | |
| Model #46300B Murray front-engine lawn tractor | 46300B | |
| Model #8-36557 Murray front-engine lawn tractor | 8-36557 | |
| Model #8-36566X31 Murray front-engine lawn tractor | 8-36566X31 | |
| Model #33915 Murray front-engine lawn tractor | 33915 | |
| Model #502254153 Craftsman front-engine lawn tractor | 502254153 | Pictorial wiring diagram |
| Model #502255170 Craftsman front-engine lawn tractor | 502255170 | Wiring system |
| Model #50225801 Craftsman front-engine lawn tractor | 50225801 | 10 lawn tractor |
| Model #91725820 Craftsman front-engine lawn tractor | 91725820 | 8e lawn tractor/wiring diagram |
Reviews
Starter switch
Fixed the issue, like new
Tim B, Hartsburg, Mo
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy to install
Was easy to install wasnt hard at all. Now to get the rest of work done Ill be good
Tanner, Alaska
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Proper part for the proper mower and quick service
We had picked up a Craftsman riding mower for free off the facebook. We brought it home, it was obviousl that the fellow who owned it didn't know what he was doing when he tried to fix it. Electrical issues. here is the list. Fuse blown and was a 20 amp instead of a 30 amp. Replaced the fuse. Solenoid went bad, checked and replaced it with a generic one with out problems. Ignition switch - burnt out plug from the previous owner who wired it wrong and shorted it out. Needed to buy the right switch, sears, you guys were the most reasonable and had the right part. Two tires and a battery later. We got the part in 3 days when we ordered it on a Saturday. Elated to have the right switch, put it in and the mower fired right up. Comparable ones are 1,500$ easy. It works great and without issues, switch easy to install repeatedly, and as far at the mower goes the Schematics in the manual, perfect, easy to read and very helpful. . Thanks for making our life easier. Joe and Chris
CoastieJoe, Cape may Nj
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Replacement for failed switch
This was quite easily the quickest replacement part fix that I have gotten from Sears. I was disappointed that the original switch only lasted 34 years.
Earl, Hudson, Ohio
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Available
Main thing was AVAILABLE. Solinoid was the culprit but switch was corroded after 38 years of service. Good instructions easy out with old , easy replacement.
none, Camano Island WA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Exact fit
10 minutes to install only common tools needed very simple.
Bob m, Antrim n.h.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Mistake in catologue
The catalogue is wrong! The key switch I bought does not replace the old one. Found the right one on Amazon. H
Louis, Vermont
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Old Craftsman Lawn Tractor Still Going Strong
This ignition switch was an exact replacement for my 12HP Craftsman II Hydro 38 lawn tractor which was manufactured in 1989. Easy plug-in repair and reasonably priced. This machine just won't quit and the continued availability of parts from Sears is the main reason for its long life.
Charliezz3, Boston, MA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour